基于GSM模块与AT89C51的接口的设计与实现.docVIP

毕 业 设 计（论 文）外 文 参 考 资 料 及 译 文 译文题目：基于 GSM 模块与 AT89C51 的接口设计及应用 的接口设计及应用 学生姓名： 张剑 学　　号：0805111010 专　　业： 08电子信息工程 所在学院： 金陵科技学院 指导教师： 杨雪峰 职　　称： 工程师 2011年 12 月 7日 说明： 要求学生结合毕业设计（论文）课题参阅一篇以上的外文资料，并翻译至少一万印刷符（或译出3千汉字）以上的译文。译文原则上要求打印（如手写，一律用400字方格稿纸书写），连同学校提供的统一封面及英文原文装订，于毕业设计（论文）工作开始后2周内完成，作为成绩考核的一部分 Based on GSM module and AT89C51 connection design and application ---From 《GSM principle and its network optimization》chapter one ---From 《New single chip microcomputer interface device and technology》chapter six Abstract This article through analyzed the GSM module and the monolithic integrated circuit connection design simply introduced the TC35i module commonly used instruction and the coding rule, introduced emphatically the TC35i module and the AT89C51 principle of work, the periphery connection electric circuit, the software control technology, at the same time has produced some TC35i module and the AT89C51 connection application procedure, proposed AT89C51 when receive data should pay attention question, thus designed has the GSM module the data transmission terminal. Key words: GSM network 1 Summarize: Along with correspondence technique of development, according to the service function of the NTT DoCoMo net, just to industry control and control from a distance the realm have continuously extension of trend.Is orientation this kind of demand, Siemens company released a new generation wireless correspondence GSM mold piece-TC35i, according to should the short news function of the mold piece, can fast safety credibility realization customer information processing etc. function, special be applicable to control centre and terminal equipments distance very far, or inconvenience adoption wired correspondence lie quality etc. situation, for example the oil well information collect behind of deliver, the l