基于单片机的数码管万年历的设计与实现.docVIP

.c文件 #includereg52.h #includeintrins.h #include1302.h #include18B20.h #includenl_week.h uchar code digit[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x8f,0x00}; uchar mode,TH,TL,TN,seconds,minutes,hours,years,months,days,WEEK,n; uchar count=0; uchar nz; sbit SET=P3^7; sbit ADD=P3^6; //增加 sbit RED=P3^5; //减小 sbit CANL=P3^4; sbit le=P2^6; sbit oe=P2^7; sbit en=P1^4; sbit beep=P2^4; void delay1ms( int x) { unsigned char i,j; for(i=x;i0;i--) for(j=124;j0;j--); } void display_Year(unsigned char year) //显示年 { unsigned char i,j; i=year/10; j=year%10; P0=digit[2]; P1=0; delay1ms(2); P0=digit[0]; P1=1; delay1ms(2); P0=digit[i]; P1=2; delay1ms(2); P0=digit[j]; P1=3; delay1ms(1); } void display_Month(unsigned char month) //显示月 { unsigned char i,j; i=month/10; j=month%10; P0=digit[i]; P1=4; delay1ms(3); P0=digit[j]; P1=5; delay1ms(1); } void display_Day(unsigned char day) //显示日 { unsigned char i,j; i=day/10; j=day%10; P0=digit[i]; P1=6; delay1ms(3); P0=digit[j]; P1=7; delay1ms(1); } void display_Hour(unsigned char hour) //显示时 { unsigned char i,j; i=hour/10; j=hour%10; P0=digit[i]; P1=8; delay1ms(2); P0=digit[j]+n*0x80; P1=9; delay1ms(1); } void display_Minute(unsigned char minute) //显示分 { unsigned char i,j; i=minute/10; j=minute%10; P0=digit[i]; P1=10; delay1ms(3); P0=digit[j]; P1=11; delay1ms(1); } void display_Week(void) { unsigned char i=0; WEEK=GetWeekFromDay(years,months,days); P1=12; switch(WEEK) { case 1:P0=digit[1]; // P1=12; delay1ms(2); break; case 2:P0=digit[2] ; // P1=12; delay1ms(2); break; case 3:P0=digit[3]; // P1=12; delay1ms(2); break; case 4:P0=digit[4]; // P1=12; delay1ms(2); break; case 5:P0=digit[5]; // P1=12; delay1ms(2); break; case 6:P0=digit[6];