双鸭山分公司东荣二矿南三上0.8Mta新采区设计.docVIP

全套设计CAD图纸，联系QQ 695132052 各专业都有 摘 要 本设计为龙煤集团双鸭山分公司东荣二矿南三上0.8Mt/a新采区设计，共有3可采煤层，煤层平均倾角为18°，煤层平均总厚度为6.63m，属于缓倾斜中厚煤层，煤层工业牌号为气煤。采区平均走向长度2200m，倾斜长度560m，设计采区的可采储量5933Mt，服务年限为5.3a。 结合矿井整体开拓布局，并结合本采区的地质条件及煤层赋存条件，本设计采区采用分组集中大巷布置，用阶段石门联系各个煤层，双翼同采。将轨道上山、回风上山和运输上山布置在采区的中央。采区采用走向长臂后退式采煤法，采煤工艺为综合机械化采煤工艺，采空区处理方法为全部垮落法。工作制度采用采用三八工作制。 本设计认真贯彻国家及煤炭工业的有关方针政策，积极推进矿井设计改革，结合本采区的具体特点，采用先进合理、符合国情要求的工艺和设备，降低工程造价，缩短建设工期，以安全第一为前提，从采煤、掘进、运输、通风、机电、提升各系统综合考虑，简化系统、容易操作、多收煤炭，为企业、社会多创效益。 由于本人专业知识水平有限，缺乏一定的现场经验，在各个方面考虑的不是很周全，错误和不妥之处，恳请各位专家和老师不吝指正。 关键词可采储量分组集中走向长壁采区安全 Abstract[1] This design for Dongrongerkuang of the Longmay coal Crop.Shuang Ya ShanCity branch company of souths on three a new mining distict designs of 0.8Mt/a , having totally three layers of the coal seam,and the average obliqquity is 18 °s all the coal seams, and the totally thickness is 6.63metres, belong to slowly tilt to one side medium thick coal seam, the coal seam industrial card number for gas coal.The trend length is 2200 metres and the dip length is 560 metres in this mining districts.The design of mining districts workable reserves is 5,933,000 tons , and the length of service is 5.3 years. Combine the whole exploit and layout[2] of the mineral well and the geology condition and the coal seam that the origin adopts area to endow with a claim check piece, this design adopts an area adoption of setting a concentrated roadway to set out for cent, using a crosscut couplet on door panels to fasten each coal seam, the double wing adopts together.Climbing mountain, returning orbit the breeze climbs mountain and the conveyance climbs mountain to arrange Be adopting area of central.Adopt an area adoption an alignment long rm countermarch a type to adopt a coal method, adopt a coal craft for synthesize the mechanization adopt a coal craft, adopting empty area processing the method fall a method for all collapses.The work system adoption adopts 38 works systems[3]. This design carries through the relevant policy of nation and