新铁煤矿1.2Mta新井设计.docVIP

全套设计CAD图纸，联系QQ 695132052 各专业都有 摘要 本设计为七台河矿业集团有限责任公司新铁煤矿1.2Mt/a新井设计，根据新铁矿的地质条件、煤层赋存等情况，本矿井设计采用双立井方案开拓方式，采煤方法为走向长壁采煤法，采煤工艺为综合机械化采煤工艺。根据该矿井的地质报告、开拓方式及回采工艺等方面的特点，确定了该矿井通风系统的通风方式和主要通风机的工作方法。矿井初期设计采区达产通风方式为后期通风方式，通风方法皆为抽出式。关键词：通风设计井通风系统通风阻力 Abstract The design for the Qitaihe Mining Group Company Limited a new iron mine 1.2Mt / a new well design, based on the new geological conditions of iron ore, coal seam occurrence and so on, the mine shaft design program to develop dual-mode method for mining to longwall mining method, coal mining technology for the integrated process of mechanization. According to the mines geological reports, mining methods and technology to develop characteristics such as to determine the mine ventilation system, ventilation fan and the main methods of work. Mine the initial design capacity of the two mining area that is a mining area and the second mining area, ventilation for the two wings of the angle type, the latter is still two months mining area,Ventilation is still the two wings of the angle-type, pre-and post-ventilation methods are out of style. The design of mine ventilation and the difficult times easier to time the total air volume to be calculated, respectively, and distribution. By calculating the initial and post-mine ventilation resistance, the main fan of mine had a selection of mine had a hole, such as calculation of the plot. Key words: the design of ventilates mine ventilation network ventilated resistance 目 录 摘要 1 Abstract 2 第1章 矿区概况及井田地质特征 1 1.1 矿区概况 1 1.1.1交通位置 1 1.1.2地形地势 2 1.1.3河流分布 2 1.1.4气象 3 1.1.5煤田开发史 3 1.1.6矿区经济概况 3 1.1.7水源及电源 3 1.1.8当地环境保护现状及存在问题 3 1.2 井田地质特征 3 1.2.1地质构造 3 1.2.2煤层及煤质 6 1.2.3地质勘探 6 1.3 矿井安全概况 7 1.3.1水文地质特征 7 1.3.2瓦斯赋存状况 7 第2章 矿井储量与生产能力 8 2.1 井田境界及储量 8 2.1.1井田境界 8 2.1.2井田地质储量及工业储量 8 2.2 矿井生产能力及服务年限 9 2.2.1矿井工作制度 9 2.2.2矿井设计生产能力及服务年限 9 第3章 井田开拓及采区通风 10 3.1 井田开拓方案 10 3.1.1开拓方式 10 3.1.2井口与工业场地位置选择 13 3.1.3井筒数目位置 13 3.1.4水平数目及标高 14 3.1.5大巷布置 14 3.1.6通风方式及通风系统 16 3.1.7采区划分及开采顺序 17 3.1.8采区内各巷