兴山煤矿1.5Mta的新井设计.docVIP

全套设计CAD图纸，联系QQ 695132052 各专业都有 摘 要 本设计新矿井为鹤岗矿业集团兴山煤矿1.5Mt/a的新井设计，共有7层可采煤层，总厚度为14.7m。设计井田的可采储量为114.7Mt。服务年限为70a。划分两个水平开采。井田平均走向长5000m，平均倾斜长2000m，煤层平均倾角20°，属于缓倾斜煤层。 本设计矿井采用双立井的开拓方式，分组集中大巷布置方式。共划分12个采区，其中首采区为1个，达产工作面2个。本设计采区为西六采区，采用语大巷装车式下部车场，综合机械化采煤。矿井年工作日为330d，采用“三、八”式工作制，设计工作面长为190m，每刀进度为0.8m，每日割四刀。提升设备为主井采用箕斗提升，副井采用罐笼提升。 由于井田走向长度较大，且为缓倾斜煤层，以及煤层地质条件等因素影响，因此本井田内全部采用走向长壁采煤法开采。 关键词 可采储量 走向长壁开采 立井 综合机械化 Abstract The task of this design is to construct a 1.5million tons new shaft for Hegang Ming Administration.This mine has three minable Coal Seam,and its average thickness is14.7 meters.Designed field of minable capacity is 114.7Mt. It can adapt for 70years, and is divided into two levels. Average alignment in farmland in well lengthways 5000 ms, average slant lengthways 2000ms, average rake angle in coal seam 20°, belong to the the slant the coal seam. This mine shaft is applied to double indined shaft development method; Layout of gathing gallergand mining district eross heading; The well farmland turns to is divided into totally 9 adopt the zone mines and 2 worked faces. This worked fece is west six worked face, words 330 days every year. Adapt “thee-eight” work situation, work face is 190meters length of circle is 0.8meters, and times is 4 one day. Because the well farmland lengthways length is bigger, and incline the coal seam for the , and coal seam geology condition etc. factor effects, so this well farmland inside the complete adoption lengthways. Key words Recoverable reserves Adoption lengthways Vertical shaft comprehensive mechanization 目录 摘 要 I Abstract II 绪论 1 第1章 井田概况及矿井地质特征 2 1.1 井田概况 2 1.1.1 井田位置及范围 2 1.1.2 交通位置 2 1.1.3 地形与河流 3 1.1.4 气象 3 1.2 地质特征 3 1.2.1 矿区范围内的地层情况 3 1.2.2 井田范围内和附近的主要地质构造 4 1.2.3 煤层赋存状况及可采煤层特征 4 1.2.4 岩石性质、厚度特征 6 1.2.5 井田内的水文地质情况 6 1.2.6 沼气、煤尘及煤的自燃性 7 1.2.7 煤质、牌号及用途 7 1．3勘探程度及可靠性 7 第2章 井田境界、储量、服务年限 9 2.1 井田境界 9 2.1.1 井田周边状况 9 2.1.2 井田境界确定的依据 9