硬质合金超声复合电加工的设计及试验.docVIP

全套设计CAD或三维图，联系QQ 695132052 各专业都有 扬州大学广陵学院 本科生毕业设计 毕业设计题目 硬质合金超声复合电加工设计及试验 学 生 姓 名 秦 峰 专 业 机械设计制造及其自动化 班 级 机械 81001 指 导 教 师 朱 永 伟 完 成 日 期 2014 年 06 月 06 日 摘 要 本文介绍了超声加工和电解加工的加工原理,分析了其存在的不足之处,对比显现出其两者复合加工的优势所在。介绍了超声－电解加工的工作原理和实验构建,并对实验结果进行了的分析计算。对进行了单一超声加工试验及分析 Abstract This paper introduces the principles of ultrasonic machining and electrochemical machining. And analyze the existence of the inadequacies, Contrast to the two to shows the advantages of the Composite processing ,Focuses on the ultrasound - the working principle of electrolytic processing and laboratory equipment. Improved the cathode and the workpiece between the micro-pressure regulator devices, horn design and production, the work of the effective supply of liquid method of precision micro-positioning device methods, processes and processing parameters detection show that the accuracy of measurement technology link, in order to test Research conditions provide the basis Finally , The paper has carried on the analysis summary to this technical processing craft, proposed that the existing craft plan existences question and the consummation measures, and proposed to the following research application conceives and forecasts Key words: Ultrasonic machining ，Electrochemical machining ，Ultrasound - ECM machining 目 录 摘 要………………………………………………………………………1 Abstract ……………………………………………………………………2 目 录………………………………………………………………………3 绪 论……………………………………………………………5 1.1 特种加工技术概述…………………………………………………………5 1.2 硬质合金的特性……………………………………………………………6 1.3 课题研究目的及内容………………………………………………………6 第二章 超声加工和电解加工………………………………………………………7 2.1 超声加工原理及特点…………………………………………………7 2.2 电解加工原理及特点…………