机械制造及自动化专业毕业论文--_小型混凝土搅拌机的设计.docVIP

小型混凝土搅拌机的设计 摘要 目前，混凝土搅拌机在国内外都有着飞速的发展，国际竞争力在不断提高。本课题主要研究混凝土搅拌机的工作原理以及搅拌机搅拌系统方案设计。根据设计要求，对混凝土搅拌机的搅拌系统初步定型，并对搅拌系统的主要部件进行设计和计算。 （1）结构由机架、搅拌装置、传动系统所主成。 机架是整个设备的支撑部分，由槽钢焊接而成。搅拌装置由搅拌筒、搅拌轴、搅拌铲片所主成，搅拌铲片固定在搅拌臂上，并且与搅拌轴主成一体，搅拌铲与搅拌筒间隙可微量调整。传动系统由组成。(2)搅拌装置的设计 搅拌装置是安装在轴套上的铲片式叶片，叶片随轴的旋转而转动，对筒内物料进行搅拌，是物料混合均匀，搅拌臂向上伸出，可起到搅拌上方物料的作用。 （3）Small concrete mixer design Abstract At present, concrete mixer at home and abroad have a rapid development, international competitiveness in the continuous high. In order to meet market demands, improving the product series, adapt to the small building construction and laboratory work demand, design the concrete mixer. This topic research vertical shaft type concrete mixer work principle and blender mixing system design. According to the requirements of the design of concrete mixer, the mixing system, and the preliminary finalize the design of the main parts by mixing system design and calculation. The main conclusions are as follows: mixer with the overall structural design of program analysis The structure is a rack mixer, mixing equipment, drive into the main. The support of the entire equipment rack is part of the channel steel and steel pipe welded. Mixing device consists of the mixing tube, shaft, mixing shovel intand with the main shaft into one, Spatula and mixing tube at the end of the gap can be micro-adjusted. Transmission from the motor, gearbox, belt drive, chain drive of the composition. (2) mixing device design Mixing device is installed in the sleeve piece on the shovel blade, blade rotation with the axis of rotation of the barrel for mixing the material, the material is mixed, stirring arm extended upward, may play a role in mixing the material above. (3) transmission system design Transmission by V belt drive and chain drive to transfer movement. Motor output speed to pass through the V-belt transmission to the gearbox, gearbox and chain drive to speed to pass through to the mixer spindle drive shaft rotation, so that th