模具设计与制造专业毕业论文--汽缸盖压铸模具设计.docVIP

摘 要 本课题主要是针对汽缸盖的模具设计,通过对铸件进行工艺的分析和比较,最终设计出一副压铸模。该课题从产品结构工艺性，具体模具结构出发，对模具的浇注系统、模具成型部分的结构、顶出系统、冷却系统、压铸机的选择及有关参数的校核、都有详细的设计，同时并简单的编制了模具的加工工艺。通过整个设计过程表明该模具能够达到此铸件所要求的加工工艺。根据题目设计的主要任务是汽缸盖压铸模具的设计。也就是设计一副压铸模具来生产汽缸盖铸件产品，以实现自动化提高产量。。通过模具设计表明该模具能达到盒盖的质量和加工工艺要求。本文主要运用Pro/ENGINEER wildfire4.0及其AutoCAD2006来完成整个设计工作。从中学习到了许多的模具设计的知识和对在校所学知识的深化，设计的整个过程实现了无纸化，有利于提高模具的生产效率和节约了生产成本，并大大缩短了生产的周期。 关键词：压铸模具设计；汽缸盖；Pro/ENGINEER wildfire4.0；AutoCAD2006； 塑件； Abstract This thesis is mainly concerned on the mould design of the lampshades,through the technical analysis and comparison of the injection moulded parts ,a plastic injection mould is formed.The issue is based on the product structure’s technical traits and mould structure,it also has a careful checking and design on the choices and parameters of the moulds’ gating system,the structure of the mould forming,ejecting system,cooling system and the injection molding machines,morever,this issue has worked out the processing technics of the moulds.The deisgn demonstrates that the mould can up to the demanding processing technics standard of the injection moulded parts.According to the main task of the design,that is to design a plastic injection mould, to produce a lampshade of plastic injection then to achieve the automation and increase the production.From the structure of the lid,this is point of dual-gate type mould.The design proves the mould can reach the lid’s quality and processing technics standard.The deign is carried through the Pro/ENGINEER wildfire3.0 and AutoCAD2007.By doing this ,I have learned a lot of mould designing knowledge and have deepened the knowledge learned during the college,the paperless of this design can improve the production efficiency and save the production cost,besids,it have shortened the production cycle. Key Words :plastic injection mould deisgn ;lampshade; Pro/ENGINEER wildfire3.0；AutoCAD2007；injection moulded parts 目 录 中文摘要 1 英文摘要 2 1．绪论 6 1．1选题的依据及意义 6 1．2国内外研究现状及发展趋势 7 1．3本课题研究内容 9 1．4汽缸盖设计任务