点阵式LED电子显示屏电路（课程设计）.docVIP

点阵LED电子显示屏的硬件电路本设计是设计一个16×16点阵LED电子显示屏的硬件电路，最终能够实现10快16×16点阵屏的动态刷新和显示功能。整体以100脚的单片机C8051F020为核心，介绍了以它为控制系统的LED点阵电子显示屏的动态设计和开发过程。通过该芯片控制行驱动器74HC154和列驱动器74HC595来驱动显示屏显示。该电子显示屏可以显示各种文字或单色图像，全屏能显示10个汉字，采用4块8 x 8点阵LED显示模块来组成一个16x16点阵显示模式。显示采用动态显示，使得图形或文字能够实现多种显示方式（例如左移，右移，上移，下移）。文中详细介绍了LED点阵显示的硬件设计思路、硬件电路各个部分的功能及原理以及使用说明等。 单片机控制系统程序采用单片机C语言进行编辑，通过编程控制各显示点对应LED阳极和阴极端的电平，就可以有效的控制各显示点的亮灭。所显示字符的点阵数据可以自行编写（即直接点阵画图），也可从标准字库中提取。 LED显示以其组构方式灵活、显示稳定、功耗低、寿命长、技术成熟、成本低廉等特点在车站、证券所、运动场馆、交通干道及各种室内/外显示场合的信息发布，公益宣传，环境参数实时，重大活动倒计时等等得到广泛的应用。 设计结果证明，该系统显示误差小，性能稳定，结构合理，扩展能力强。 ：C8051F020单片机； LED； 点阵显示； 动态显示；KEILC语言 Abstract This design is to design a 16 × 16 dot matrix LED electronic display hardware circuit, finally able to achieve 10-speed 16 × 16 dot matrix screen refresh and display the dynamic. 100 feet overall C8051F020 MCU core, introduced with its LED matrix control system for the electronic display of dynamic design and development process. Control line by the chip and column driver 74HC154 74HC595 to drive the display driver display.The electronic display can display a variety of text or monochrome images, full screen can display 10 characters, with four 8 x 8 dot matrix LED display module to form a 16x16 dot matrix display mode. Shows the dynamic display, making graphics or text to achieve a variety of display (such as left, move right, move up, down). This paper details the LED dot matrix display hardware design ideas in various parts of hardware features and principles and the use of descriptions. Microcomputer control system with microcontroller C language program for editing, by programming the corresponding control points, the display LED anode and cathode of the level, you can effectively control the display points of light off. The characters dot matrix display data can be written on their own (ie, drawing a direct lattice), can also be extracted from the standard font. LED display is flexible in its fabric, display stability, low power consumption, long life, technology