OTN重点学习笔记.docVIP

OTN学习笔记 1、The optical transport hierarchy (OTH) supports the operation and management aspects of optical networks of various architectures, e.g., point-to-point, ring and mesh architectures. This Recommendation defines the interfaces of the optical transport network to be used within and between subnetworks of the optical network, in terms of: ? optical transport hierarchy (OTH); ? functionality of the overhead in support of multi-wavelength optical networks; ? frame structures; ? bit rates; ? formats for mapping client signals. 光传送序列（OTH）支持各种体系结构（即点对点、环形和网孔形体系结构）光网络的运行和管理。 依据光传送序列（OTH）、多波长光网络支持中的开销功能、帧结构比特率及映射客户信号的方式，本建议定义了光传送网络的接口，以便将这些接口用于光网络的子网内部和子网之间。 2、optical transport module (OTM-n.m): The OTM is the information structure that is transported across an ONNI. The index n and m define the number of supported wavelengths and bit rates at the interface. Two OTM structures are defined: The OTM with full functionality (OTM-n.m) is the information structure used to support optical transmission section (OTS) layer connections in the OTN. The characteristic information of the optical transmission section layer (OTS_CI) consists of information payload (OTS_CI_PLD) and optical transmission section overhead information fields (OTS_CI_OH). The optical transmission section overhead (OTS_OH) information fields are contained within the OTM overhead signal (OOS) information structure. The OTM-n.m consists of up to n multiplexed optical channels and an OTM overhead signal to support the non-associated overhead. The OTM with reduced functionality (OTM-nr.m/OTM-0) is the information structure used to support optical physical section (OPS) layer connections in the OTN. The characteristic information of the optical physical section layer (OPS_CI) consists of information payload (OPS_CI_PLD). OTM-0 consists of a single optical channel without a specific colour assigned. The OTM-nr.m consists of up to n multiplexed optical channels. Non-associated overhead is not supported 光传送模块（OT