鸡西矿业集团东山煤矿3.0Mta的新井设计（附全套CAD图纸）.docVIP

全套设计CAD图纸，联系QQ 174320523,各专业都有 各专业都有 摘要 鸡西矿业集团东山煤矿3.0Mt/a的新井设计，井田内6层可采煤层，总厚度为14.9 m，均为1/3焦煤。设计井田的可采储量为262.52Mt。服务年限为63a。初步划分二个水平。 东山矿井采用双立井的开拓方式，集中大巷及采区石门方式布置。共划分5个采区，其中首采区为2个，投产工作面2个，建井工期50个月。设计采区为中一上，大巷装车式下部车场，采用分区式通风，综合机械化采煤。年工作日为330天，采用“四，六”式工作制，工作面长为200m，每刀进度为0.8m，每日割10刀。提升设备为主井采用2对16t箕斗提升，副井1对6t罐笼提升。 我是一名普通大四学生专业知识有限，缺乏现场经验及现代矿井设计理念。因此，东山矿新井设计会出现一些问题，请各位专家和老师批评指导，不吝赐教。 关键词：立井开拓；单一走向长壁；综合机械化采煤；采区。 Abstract The task of this design is to construct a 3.0million tons new shaft for Jixi dongshan Ming Administration.This mine has sex minable Coal Seam, and its average thickness is 14.9 meters, types of coal seam is 1/3 coking coal. Designed field of minable capacity is 262.52 million tons. It can adapt for 63years, and is divided into two level. This mine shaft is applied to double indined shaft development method; Layout of gathing gallergand mining district eross heading; This level is divided into 5 mining districts and 2 worked faces. Time of constructing shaft is 43.2 months. This worked fece is middle 1 and right 1 worked face, ords 330 days every year. Adapt “four-six” work situation, work face is 200 meters length of circle is 0.8meters, and times is 10 one day. Because my limit working ability and time. There must be lots of faults in this design. I plead with dirextors point them out and redify it, and I will accept it sincerely and humblely. Keyword:singleftrend grous wall;synthesize mechanizationcoal mining the zone mines. 目 录 摘要 I Abstract II 目 录 III 绪论 - 1 - 第1章 井田概况及地质特征 - 2 - 1.1 井田概况 - 2 - 1.1.1交通位置 - 2 - 1.1.2地形地势 - 2 - 1.1.3气象及地震情况 - 2 - 1.1.4水文地质情况 - 2 - 1.1.5煤田开发史 - 2 - 1.1.6工农业及原料供应状况 - 2 - 1.1.7水源及其电源 - 3 - 1.2 地质特征 - 3 - 1.2.1矿区范围内的地层情况 - 3 - 1.2.2井田范围内和附近的主要地质构造 - 4 - 1.2.3煤层赋存状况及可采煤层特征 - 4 - 1.2.4岩石性质、厚度特征 - 5 - 1.2.5井田内水文地质情况 - 7 - 1.2.6沼气 煤尘及自燃性 - 7 - 1.2.7煤质 牌号及用途 - 7 - 1.3 勘探程度及可靠性 - 7 - 第2章 井田境界、储量、服务年限 - 8 - 2.1 井田境界 - 8 - 2.1.1井田的周边状况 - 8 - 2.1.2井田境界确定依据 - 8 - 2.1.3井田未来发展情况 - 8 - 2.2 井田储量 - 8 - 2.2.1井田储量计算 - 8 - 2.2.2 保安煤柱的设计方