处理量120TD牛乳喷雾干燥系统的设计(含全套CAD图纸).docVIP

需全套CAD或三维图或代码 联系QQ 648328618 摘 要 本课题为处理量10T/D牛乳喷雾干燥系统。采用的是并流喷嘴雾化式干燥装置。通过物料衡算和热量，确定操作参数和干燥器的结构参数。此设计采用了压力式喷嘴。通过喷嘴结构及进料量计算干燥器的直径。另外，通过通风量计算塔径。综合两者确定塔径。塔高的确定采用干燥强度法估算，然后应用高度和直径比进行核算，除尘装置采用的是旋风分离器和袋滤器。在实际价值方面，在保持一定的操作弹性和适当的压力降的前提下，更加合理的设计干燥塔的结构和附属装置的结构，以提高喷雾干燥系统的效率和产率，达到更加节能的目的。喷雾干燥是使液态的物料经过喷雾进入热的干燥介质中转变成干粉料。它是包括干燥在内的颗粒物料一次连续处理过程。进料可以是溶液、悬浮液和糊状物。制成的干料呈粉状、颗粒或聚结成团块。喷雾干燥操作在许多工业中能满足干料质量指标的要求，产品便于作进一步加工或直接供消费者使用。经过近几十年的深入研究和发展，喷雾干燥已成为能干燥许多品种的产品、竞争能力很强的干燥方法。 关键词：喷雾干燥 ；压力喷嘴 ；旋风分离器 ；袋滤器 Abstract The topic for the capacity of 120T / D milk spray drying system. It is based on atomizing nozzle and flow-drying devices. Through the material balance and energy and dryer set operating parameters of the structural parameters,This design uses a pressure nozzle. Through the nozzle into the structure and terms Liaoliang dryer in diameter In addition, through the ventilation tower in terms of tracks, the two determined integrated tower Drive. The height of the dry determined by strength of estimates, and height and diameter than the application of accounting and dust removal device using a cyclone and bag filters. In real value, in the operation to maintain a certain flexibility and the appropriate pressure drop, under the premise of a more rational design of the structure and drying tower subsidiary of the device structure, spray drying system to improve the efficiency and yield to achieve the purpose of more energy saving. Spray drying is to spray the liquid material into the heat of the dry powder into a medium transit materials. It is dry, including a particle materials for processing. Feeding can be a solution, suspension and paste. Liu was made of dry powder, granules or poly form clumps. Spray drying operation in many industries to meet the expected quality indicators stem the requirements for products for further processing or for direct consumer use. After decades of in-depth research and development, spray drying has become to many varieties of dry products, the competitiven