RL5160GNG奶罐车改装设计（含全套CAD图纸）.doc

买文档后送图纸，QQ 194535455 摘 要 随着我国经济的发展，奶制品、食用油、饮料等行业对产品运输的要求越来越大，大型罐的需求量日益增加。，在整个设计过程中将参考其他液罐汽车罐体截面的基本形状，选择简单、截面。为了保证口味，需要低温运输，参照隔热保温车的隔热保温原理，设计有隔热保温层。隔热保温结构是将罐体设计成双层罐，并在两层罐体之间填充隔热材料，防止外界的温度对关内液体温度的影响最后进行整车动力性、燃油经济性进行了计算 关键词：罐式汽车罐车罐体隔热层ABSTRACT As Chinas economic development, to further improve peoples living standards, consumption of milk in the rapid growth, while dairy products, edible oil, beverage and other industries for product transportation requirements increasing, the demand for large-scale milk tanker increasing. Milk tanker and put into operation in the manufacture of liquid food transport, often encounter the following problems: insulation less effective, and the remaining higher rate, the cleaning effect of the liquid food is not ideal. Trends for milk tanker based understanding and awareness of its problems, this paper describes a performance of better milk tanker design.  After reviewing a lot of relevant information based on the selection of second-class chassis, the total tank in order to become a major design of the main design, the entire design process will make reference to other liquid food can cross-section of the basic shape of the tank car, choose a simple , technology is good, the highest rate of circular cross-section volume. In order to ensure the taste of milk, cold chain needs, with reference to the car thermal insulation thermal insulation principle, the design of thermal insulation layer. Thermal insulation structure is designed to double the tank tanks, and filling in between two layers of insulation material tank to prevent the outside temperature on the temperature of the liquid off. Because milk is a way for bacteria multiply rapidly ideal nutritional substrate, milk and other liquid food after use, if not ﹑ thoroughly cleaned, the bacteria will multiply, thus affecting the quality of health products, so the cleaning device design. Finally, the vehicle power, fuel economy was calculated.  Vehicle design is complete, the mi