支架零件的工艺规程及钻14孔夹具设计（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 支架零件的工艺规程及钻14孔夹具设计ABSTRCT This design content has involved the machine manufacture craft and the engine bed jig design, the metal-cutting machine tool, the common difference coordination and the survey and so on the various knowledge. The reduction gear box body components technological process and its the processing ￠ hole jig design is includes the components processing the technological design, the working procedure design as well as the unit clamp design three parts. Must first carry on the analysis in the technological design to the components, understood the components the craft redesigns the semi finished materials the structure, and chooses the good components the processing datum, designs the components the craft route; After that is carrying on the size computation to a components each labor step of working procedure, the key is decides each working procedure the craft equipment and the cutting specifications; Then carries on the unit clamp the design, the choice designs the jig each composition part, like locates the part, clamps the part, guides the part, to clamp concrete and the engine bed connection part as well as other parts; Position error which calculates the jig locates when produces, analyzes the jig structure the rationality and the deficiency, and will design in later pays attention to the improvement. Keywords: The craft, the working procedure, the cutting specifications, clamp, the localization, the error 目 录 摘 要 2 ABSTRCT 3 序 言 1 一、 零件的分析 2 零件的工艺分析 2 二. 工艺规程设计 2 2.1 确定毛坯的制造形式 2 2.2 基面的选择 2 2.3 制定工艺路线 2 2.4 机械加工余量、工序尺寸及毛坯尺寸的确定 4 2.5 确定切削用量及基本工时 4 三、 夹具设计 10 3.1 定位基准的选择 10 3.2 切削力及夹紧力计算 10 3.3定位误差分析 11 3.4夹具设计及操作的简要说明 11 二、 总 结 12 致 谢 13 参 考 文 献 13  序 言 机械制造业是制造具有一定形状位置和尺寸的零件和产品，并把它们装备成机械装备的行业。机械制造业的产品既可以直接供人们使用，也可以为其它行业的生产提供装备，社会上有着各种各样的机械或机械制造业的产品。我们的生活离不开制造业，因此制造业是国民经济发展的重要行业，是一个国家或地区发展的重要基础及有力支柱。从某中意义上讲，机械制造水平的高低是衡量一个国家国民经济综合实力和科学技术水平的重要指标。 支架的加工工艺规程及其铣，钻的夹具设计是在学完了机械制图、机械制造技术基础、机械设计、机械工程材料等进行课程设计之后