LSY163螺旋输送机设计（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 本 科 生 毕 业 论 文（设 计） 题 目： LSY163螺旋输送机设计 学习中心： 层 次： 专 业： 年 级： 学 号： 学 生： 指导教师： 完成日期： 年 月 日 摘要 螺旋输送机是一种常用的不具有挠性牵引构件的连续输送机械，其原理是使物料从进料口加入，利用工作构件即螺旋体的旋转运动使物料向前运送。该推力的径向分力和叶片对物料的摩擦力，有可能带着物料绕轴转动，但由于物料本身的重力和料槽对物料的摩擦力的缘故，才不与螺旋叶片一起旋转，而在叶片法向推力的轴向分力作用下，沿着料槽轴向移动。 随着我国工业技术的日益发展，螺旋输送机广泛应用于是冶金、采矿、动力、建材、轻工、码头等一些重工业及交通运输等部门。主要运用于运送大宗散货物料，如煤、矿石、粮食、砂、花费等。 本文在参考国内外大量文献资料的基础之上，以建筑业为背景，对此工况下所要求的螺旋输送机结构进行设计与计算，对整个装置中的传动系统进行了运动力学分析及结构设计，对其驱动装置做了深入设计，并着重对其主要零部件进行了具体设计，包括螺旋输送机的螺旋直径，螺距，轴径进出料口，叶片形式，中间悬挂轴承，槽体，螺旋轴的计算选型。 关键词 电动机；减速器；螺旋叶片；螺旋轴 Abstract With the growing of modern science and technology development, application of the screw conveyor is more and more widely. When the material was added to the inlet orifice, and the shaft rotated, the materials was given the thrust by the helicallobe. The thrust of the radial contribute to the material and blade the friction, it is possible that the materials could rotate around the axis, but because of the gravity of the material and the friction which the silo acted, the material do not rotate with the helicallobe, it move along the axis of the silo by the thrust of the spiral blade . For the construction industry background, which is required by the screw conveyor design and structure in this design. The entire device in the transmission system for the movement of mechanical and structural was designed. The design of its driving system and the specific design of its main parts, which is including the screw conveyor spiral diameter, pitch, the shaft diameter of inlet orifice, the calculation and selection of the shafts, the middle hoist and the spiral axis were carried out. In detal, motor is through the power of the scr