XZ25-50变速箱工艺及镗床夹具设计（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 图书分类号： 密 级： 摘要 XZ25-50变速箱零件是压路机的基本零件之一。它把变速箱中的轴和齿轮等有关零件和机构联接为一整体，使这些零件和机构保持正确的相对位置，以便其上各个机构和零件能正确、协调一致地工作，变速箱体的加工质量直接影响变速器的装配质量，进而影响压路机的使用性能和寿命。 本课题进行XZ25-50变速箱零件精镗孔专用机床设计，主要步骤和内容分为： 1) 箱体零件工艺设计 在分析了被加工箱体具体结构及主轴孔精度要求的基础上，详细制定了箱体加工整体加工工艺路线和精镗工序加工工艺流程(包括工件定位、夹紧、加工刀具的选择、切削用量的确定、切削力与切削功率的计算等)。 2) 根据被加工零件的结构特点、加工内容的尺寸和精度要求，确定组合镗床的配置方案。对专机进行总体设计－三图一卡。 3）精镗孔专用夹具设计 The XZ25-50 gear box components are one of bulldozer basic components.It links relevant parts and organizations such as the axle in the gearbox and gear wheel as a whole , ake these parts and organizations keep the correct relative position, and then influence serviceability and life-span of the road roller. This study carries on design with Finishing Combination boring lathe in the XZ25-50 gear box, the main step and the content divided into: (1) Box body parts process planning In analyzing the processing box body’s concrete structure and the main axle hole precision request, formulated whole processing craft route in the box body processing and finished boring working procedure processing technical process in detail (including workpiece localization, clamps, processes cutting tool’s seletian, cutting specifications’ determination, cutting force and cutting power’s computation and so on). (2) Modular machine-tool design According to the feature of processed parts, processing request, accuray request and so on, may determine to basic disposition plan the combinated boring lathe. Carries on a whole design - three charts and one card. (3) machine tool control principle By carrying on a special machine’s design, this study forwardly carries on analysis and the formulation to the electrical control. Keyword Process planning Craft clamp Control principle 目 录 1 绪论 1 1.1 序言 1 2 工艺分析 4 2.1 零件的分析 4 2.1.1零件的功用 4 2.1.2零件的工艺分析 4 2.2 零件的工艺规程设计 6 2.2.1确定零件的生产类型： 6 2.2.2确定零件的毛胚制造形式 6 2.2.3定位基准的选择 6 2.2.4零件各表面加工顺序的确定 6 2.2.5 拟订工艺路线 7 2.2.6 毛坯余量与工序余量的确定 8 2.3切削用量和时间定额 9 3 组合机床设计 20 3.