扳手塑件塑料注射模具设计（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 * * * * 学 院 毕 业 设 计（论 文） 题目＿扳手塑件塑料注射模具设计 姓 名 ＿＿*****＿＿ 系 （部）＿机电工程系＿＿ 专 业 机械制造与自动化 指导教师 ＿＿*＿＿*＿ ＿ 2008年 5月 26 日 摘 要 本设计主要是针对扳手的模具设计,通过对塑件进行工艺的分析和比较,最终设计出一副注塑模。该设计从产品结构工艺性，具体模具结构出发，对模具的浇注系统、模具成型部分的结构、顶出系统、冷却系统、注塑机的选择及有关参数的校核、都有详细的设计，同时并简单的编制了模具的加工工艺。通过整个设计过程表明该模具能够达到此塑件所要求的加工工艺。根据题目设计的主要任务是香皂盒注塑模具的设计。也就是设计一副注塑模具来生产香皂盒塑件产品，以实现自动化提高产量。针对香皂盒的具体结构，该模具是侧浇口的单分型面注射模具。 同时，在设计过程中，通过查阅大量资料、手册、标准、期刊等，结合教材上的知识也对注塑模具的组成结构（成型零部件、浇注系统、导向部分、推出机构、排气系统、模温调节系统）有了系统的认识，拓宽了视野，丰富了知识，为将来独立完成模具设计积累了一定的经验。 关键词：塑料，模具，分型面，注射机 Abstract This design is mainly directed against the soap box die design, through the technology of plastic parts for analysis and comparison, the final design an injection mold. The design process from the product structure, the structure of the specific die, die casting, mold forming part of the structure, the roof system, cooling system, the choice of injection molding machines and related parameters of the check, have the detailed design, And the establishment of a simple mold processing technology. Through the entire design process that the mold plastic parts can achieve this by the requirements of the processing technology. According to Title Designs main task is to soap box injection mold design. Which is designed to produce an injection mold plastic parts soap box products, so as to improve the automation of production. Soap box for the concrete structure, the die is the side gate of the single type of injection molds. At the same time, in the design process, through access to vast amounts of data, manuals, standards, periodicals, etc., with materials on the knowledge of the injection mold of the structure (forming parts, casting, direction of the launch, the exhaust system, Die-conditioning) system with the understanding, broaden the horizons and enrich the knowledge, complete independence for the future die design has accumulated some experience.Key words: plastic, molds, type face, injection machine 目 录 摘 要 III Abstract I