基于ProE的鼠标上盖注射模具设计（含CAD图纸全套）.docVIP

买文档后送图纸，QQ 194535455 摘要 随着塑料制品的应用越来越广泛，对塑料模具设计和制造的要求也越来越高。我国塑料模具工业经过了半个多世纪的迅速发展，无论是设计水平、加工制造技术还是CAD技术都有了明显的提高，但与发达国家相比，仍有不小的差距，尤其是CAD/CAM/CAE技术的应用。 本次模具设计以鼠标上盖为研究对象，应用ProEngineer软件设计三维立体图，然后借助Moldlow软件强大的分析和动态仿真功能，对注塑模具进行了优化分析。主要内容如下： 分析了鼠标上盖的工艺特性，并介绍了ABS材料的成型工艺特点； 利用MoldFlow分析出最佳位置区域对浇口位置不同的布置方案进行了比较，采用了最佳浇口位置； 利用Pro/E外挂工具EMX进行标准模架设计； 利用MoldFlow对产品的冷却、填充、翘曲变形等方面进行优化分析，并通过优化参数得到比较合理的结果； 对模具的成型零件进行了结构分析及计算对模具的工作原理进行了简单介绍； 塑料模具；鼠标上盖；Pro/E；MoldFlowAbstract With more and more extensive application of plastic products, plastic mould design and manufacturing requirements are also increasing. Plastic mould industry in China is after over half a century of rapid development. The level of design, manufacturing technology or CAD technology have been significantly improved, but compared with developed countries, there is still a big gap, especially CAD/CAM/CAE technology application. The mould design with the mouse top cover for research object ,designed three-dimensional map by the application of Pro/Engineer software., and then used the powerful analysis and dynamic simulation features of MoldFlow to optimize the analysis of injection mould. Main content as following: Analyzed the characteristics of process on the mouse top cover, and introduced the characteristics of the forming process of ABS material; Using MoldFlow determined the best location of the region. Then compared the different positions on the gate layout schemes to obtain the best location of the gate; Using Pro/E designed the parting surface and the plug-in tool EMX designed the standard formwork; Using MoldFlow obtained the cooling analysis, flow analysis and warping analysis., etc, and by optimizing the parameters obtained reasonable results; Analyzed and calculated the structure of the mold forming part, and simply introduced the working principle of the mould; Based on the correlation analysis and the calculation ,the mouse top cover injection mould design was completed. Keywords plastic mould the mouse