往复式煤炭输送机的毕业设计（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 往复式煤炭输送机的设计 摘 要 保障煤炭供应是国家加强煤炭工业宏观调控的重点之一，煤炭深加工更是国家重工业发展的重中之重，输送机设备作为煤矿生产系统的基础设备,给煤设备的可靠性,特别是关键咽喉部位给煤设备的可靠性,直接影响整个生产系统的正常运行。生产实践证明,现有的往复式给料机的生产能力小、安装和拆卸不方便、受力不均匀等缺点。，随着煤炭工业的发展,煤矿井型不断地扩大,现有Ｋ型往复煤炭输送机生产能力小,不能满足大型矿井的要求，因此,改进和扩大现有Ｋ型往复煤炭输送机是完全必要的。往复式煤炭输送机具有结构简单、维修量小、性能稳定、噪音低、安装方便等优点。 关键词：往复式煤炭输送机；减速器；受力分析；强度校核；装配  Abstract To protect the supply of coal is the coal industry to strengthen macro-control of one of the key points，deep processing of coal is the most important national industrial development,coal mine production equipment is the one of the main equipment for coal equipment reliability, Special location is the key to the throat of coal equipment reliability, a direct impact on the entire production system to normal operation. Practice has proved that the existing reciprocating Feeder small production, With the development of coal industry and coal-wells continues to expand, the existing K-type reciprocating coal production capacity of the small plane, unable to meet the requirements of large-scale mine, therefore, improve and expand existing K-type reciprocating to the coal machine is totally necessary. The design of the reciprocating to the coal on the basis of the original made some improvements, it has a simple structure and a small amount of maintenance, stable performance, low noise, the installation is easy. Keywords : Reciprocating coal conveyor；Reducer；Analysis；Strength Check；Assembly  目 录 、摘 要 1 Abstract 2 引 言 3 1. 带式输送机工作部件简介 4 输送机由以下部件组成： 4 1.1. 输送带 4 1.2. 驱动装置 4 1.3. 电动滚筒 4 1.4. 传动滚筒 4 1.5. 托辊 4 1.6. 拉紧装置 4 1.7. 制动及逆止装置 4 2. 输送机的运动和动力设计计算 5 2.1. 输送机负载功率计算 5 2.2. 电动机的选择 6 3. 往复式煤炭输送机的结构设计 9 3.1. 煤炭输送机整体结构和工作原理 9 3.2. 煤炭输送机给料槽箱体尺寸的确定 9 3.3. 输送带的选择与计算 10 3.4. 机架的设计计算 10 3.4.1. 输送机的载荷 10 3.4.2. 应力计算 11 3.4.3. 连接计算 11 4. 减速器的设计与校核 14 4.1. 低速级齿轮的设计及校核计算 14 4.2 . 高速级齿轮的设计 16 4.3. 低速轴的设计及校核 18 4.4. 中间轴的设计及校核计算 19 4.5. 高速轴的设计及校核 21 4.6. 轴上键的选择与校核 22 5. 其他装置的设计 25 5.1. 拉紧装置的选择设计 25 5.2. 滚筒 25 6. 往复式煤炭输