围板包装箱自动生产线合围装置设计（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 摘 要 围板箱作为产品外包的物流设施，围板箱越来越受客户的欢迎，使用量巨大。然而，现有的围板箱生产方式落后，在生产中人为因素较大，这使得围板箱的生产上存在着生产效率低，质量不稳定等缺陷。这严重影响着围板箱的应用。为了提高劳动生产率，降低工人劳动强度，节约生产成本，我们对围板箱的现有生产工艺进行了研究，通过对原有围板箱生产工艺的分析，设计了适应于围板箱的自动合围装置。 围板包装箱在生产过程中主要分为上料、拼接、钻铆、合围等几部分工序，本论文主要是设计合围装置的说明。将2个用铰链连起来的2片木板的两端分别铆接起来。连接起来的木板链一端是只有孔，另一端是仅铆接了半面铰链（另半面没有铆接）。首先第一步是铆接了半面铰链的一端在前另一端在后，通过挡板来约束定位；第二步运用气压缸来推动夹紧块来夹紧木板，使之不能像对滑动;之后在是夹紧装置绕主轴旋转180°，在重复第一、二步操作（第二次只旋转90°），使两块木板合围，之后通过平移夹紧旋转装置使需要铆接的部分移到铆接机上，在上铆钉铆接从而完成合围。 关键词：围板箱；合围；铆接；自动生产线 Abstract Hoardings box as outsourcing logistics facilities around the crate more and more popular with customers , a huge amount of use . However, the backward the existing hoardings box mode of production in the production of man-made factors , which makes the production of hoardings box there is low productivity, unstable quality defects . This has seriously affected the application of hoardings box . In order to improve labor productivity, reduce labor intensity , reduce production costs , we conducted a research on the hoardings Box existing production process through the analysis of the production process of the original hoardings box , designed to adapt to the hoardings box automatically encirclement devices. The hoardings box on materials , stitching, drilling and riveting , encircled in the production process is divided into several parts process of this thesis is the design of the encirclement device . Two hinges to link two of the ends of the planks were riveted . Connected one end of the wood chain is the only hole , the other end is only half a face riveted hinge ( the other half of a riveting ) . First step is riveting half-face one end of the hinge in front the other end of the baffle to constrain the positioning ; second step the use of pneumatic cylinder to push the clamping block for clamping wood , so they can not like sliding ; after clamping device around the spindle 180 ° , repeat the first and second steps ( second rotation only 90 ° ) , so that the two p