硬质合金超声复合电加工设计及试验（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 扬州大学广陵学院 本科生毕业设计 毕业设计题目 硬质合金超声复合电加工设计及试验 学 生 姓 名 专 业 班 级 指 导 教 师 完 成 日 期 2014 年 06 月 06 日 摘 要 本文介绍了超声加工和电解加工的加工原理,分析了其存在的不足之处,对比显现出其两者复合加工的优势所在。介绍了超声－电解加工的工作原理和实验构建,并对实验结果进行了的分析计算。对硬质合金进行了单一超声加工试验及分析；对硬质合金（YG8、YT15等）进行了超声、超声—电解复合加工试验,两实验对比分析,从而论证了超声电解加工方法的可行性,优势性和必要性,为今后进一步研究和实际应用奠定了理论和实验基础。 论文最后对该技术加工工艺进行了分析总结,提出现有工艺方案存在的问题及完善的措施，并对后续研究应用提出了设想和展望。 关键词：超声加工，电解加工，超声电解复合加工，硬质合金 Abstract This paper introduces the principles of ultrasonic machining and electrochemical machining. And analyze the existence of the inadequacies, Contrast to the two to shows the advantages of the Composite processing ,Focuses on the ultrasound - the working principle of electrolytic processing and laboratory equipment. Improved the cathode and the workpiece between the micro-pressure regulator devices, horn design and production, the work of the effective supply of liquid method of precision micro-positioning device methods, processes and processing parameters detection show that the accuracy of measurement technology link, in order to test Research conditions provide the basis Finally , The paper has carried on the analysis summary to this technical processing craft, proposed that the existing craft plan existences question and the consummation measures, and proposed to the following research application conceives and forecasts Key words: Ultrasonic machining ，Electrochemical machining ，Ultrasound - ECM machining, Hard metal 目 录 摘 要………………………………………………………………………1 Abstract ……………………………………………………………………2 目 录………………………………………………………………………3 绪 论……………………………………………………………5 1.1 特种加工技术概述…………………………………………………………5 1.2 硬质合金的特性……………………………………………………………6 1.3 课题研究目的及内容………………………………………………………6 第二章 超声加工和电解加工………………………………………………………7 2.1 超声加工原理及特点…………………………………………………7 2.2 电解加工原理