采用调速阀的速度换接回路实验装置设计【全套CAD图纸】【2013年机械毕业设计】.doc

本科毕业设计(论文) 题目：采用调速阀的速度换接回路实验装置设计 系 别 机电信息系 专 业机械设计制造及其自动化 班 级 学 生： 学 号 指导教师： 2013年5月 用调速阀的速度换接回路实验装置设计 摘 要 速度换接回路的功用是使液压执行机构在一个工作循环中从一种运动速度换到另一种运行速度，因而这个转换不仅包括快速转慢速的换接，而且还包括两个慢速之间的换接。实现这些功能的回路应该具有较高的速度换接平稳性。 本文阐述了采用调速阀的速度换接回路实验台的设计，主要对工作原理、结构组成、参数计算等发面做了详细的分析与研究，得出一套较为合适的方法来设计实验台。主要通过查阅相关资料，应用相关公式，从而对油箱进行，然后来选择液压站的动力装置，确定电机与泵的安装方式，最后根据原理图以及各项参数来进行管路与管接头的选择，从而完成整个设计。 论文首先综述了国内外液压技术的研究进展及研究现状、分析课题的研究背景、阐述课题研究的意义和内容。然后重点从原理设计、各回路的功能分析与选择入手，从而选择液压元件，计算其性能是否符合指标，最后校核温升。 关键词：液压基本回路；速度换接回路；实验装置 The Design of Switching Circuit Experiment Device Adopting the Speed Regulator Valve Abstract Speed exchange circuits are used to make the hydraulic actuator to change from one motion to another running speed in a work cycle, so the conversion includes not only the fast switching for slow, but also includes the exchange between the two slow. Loop should achieve these functions with high speed and stability This paper describes the design of circuit experiment platform for the speed regulator valve, mainly on the working principle, structure, parameter calculation etc to do a detailed analysis and research, to design the experiment which obtains a set of suitable method. Through access to relevant information, related formulas are used, thus the choice of tank, power plant and then to select the hydraulic station, the installation mode of motor and pump, finally to pipeline according to the schematic and the various parameters and selection of pipe joints, so as to complete the whole design. The paper first summarizes the analysis of the status quo, and research progress of study on the hydraulic technology at home and abroad and the significance of research background, describes the research topics. Then focus from the principle of design, function analysis and selection of circuits, and choosing hydraulic components, its performance