材料成型及控制工程专业毕业论文--汽车侧面板的冲压工艺及其模具设计.docVIP

摘 要冷冲模是广泛运用的模具之一，种类包括冲孔模、落料模、弯曲模、拉深模等，近年来冷冲模的应用越来越广泛。冷冲压具有成本低，产品质量稳定，能加工多种性能，状态的零件。同时它的应用和普遍也受到模具寿命和生产安全等方面的制约。从工艺的合理性出发，分析了的结构，精度特点，以及在加工过程中的控制点，然后在满足加工精度的基础上充分考虑节约成本确定了最优化的加工工序；紧接着通过熟悉各类模具的加工特点及内部结构，完成模具总体结构分析模具工作部分尺寸等工艺计算，力争以最好的性价比设计了模具各零件的结构及装配关系，在此基础上确定模具的外形，完成了装配 图和非标准的零件图。最后确定压力机类型及主要参数。  关键词：冷冲压Abstract Dies is one of coldly widespread utilization molds, the type including the piercing die, the cut die, the bending die, the drawing mold and so on, the application which in recent years dies coldly is getting more and more widespread. The cold stamping has the cost to be low, the product quality is stable, can process many kinds of performance, the condition components. Simultaneously its application and also receives aspect the generally and so on die life and production safety restrictions. This design embarked from the craft rationality, analyzes the punch holes to fall the material superposable die and the bending die structure, the precision characteristic, as well as in processing processs control point, then in satisfied the working accuracy in the foundation to consider fully saved the cost to determine the optimized working process; Is following closely through the familiar each kind of molds processing characteristic and the internal structure, completes mold process designs and the design and so on gross structure analysis and mold effective range size, argued vigorously has designed the mold various components structure and the assembly relations by the best performance-to-price ratio, based on this determined that molds contour, has completed the assembly drawing and the non-standard detail drawing. Finally determination press type and main parameter. KEYWORDS: Cold stamping Progressive die Press the craft Mold design 目 录 第1章 引 言 1 1.1 设计意义 1 1.2 设计目的 1 1.3?冲压工艺的种类 2 1.4 冲压工艺的特点及其应用 2 1.5 冲压模具的种类 3 1.6 冲压模具的发展现状与发展趋势 4 1.7 设计的主要内容 6 第2章 制件的工艺分析及模具的总体结构设计 7 2.1 分析零件的冲压工艺性 7 2.2 分析比较和确定工艺方案 8 2.2.1 方案比较 8 2.2.2 方案确定 8 2.3 连