电子科学与技术专业毕业论文--基于单片机控制的智能工具柜.docVIP

摘 要 本文主要介绍了一种以单片机AT89S51和电子密码锁及传感器为核心，通过软件编程对工具柜进行智能化管理。它主要采用硬件电路和软件编程控制相结合的一种新型的工具柜。硬件电路通过自动检测系统自动检测工具，单片机发送数据给液晶屏显示，电子密码锁用来控制开门与关门；软件编程主要对工具柜中的工具进行定时检查和记录工具取出或还回的时间，对输入的密码进行核对，密码正确则开门，否则报警，密码输入错误三次以上则锁定密码，同时将这些信息记录并送至液晶屏显示。本说明书主要包含硬件和软件两部分。硬件系统有电子密码锁、液晶显示、自动检测电路，软件系统有单片机程序。 该智能工具柜对许多公司用来管理工具来说，给他们提供了很简捷的方法，能够有效的防止工具的遗失，同时也提高了工作效率，有很好的市场前景。 关键词：单片机；电子密码锁；液晶显示；检测仪；4×4矩阵键盘 ABSTRACT This article describes a single-chip AT89S51 and electronic locks and sensors at its core, software programming tools for the cabinet to carry out intelligent management. It is mainly used hardware and software programming to control the combination of a new type of tool cabinets. Hardware circuit through the automatic detection system, automatic detection tool, to send data to the single-chip LCD display, electronic locks and open the door closed to control; software programming tools for the main cabinet of tools to carry out regular inspections and record tools, or out back The time for the password to check, then open the correct password, or report to the police, enter your password wrong more than three times the password is locked at the same time this information will be recorded and sent to the liquid crystal display screen. Statement of the main hardware and software contains two parts. Hardware system with electronic locks, liquid crystal display, automatic detection circuit, single-chip system software program.  The counter intelligence tool for many companies used management tools, to provide them with a very simple way to effectively prevent the loss of tools, as well as improved efficiency, there is a very good market prospects. Key words: single-chip, electronic locks, liquid crystal display, Monitor, 4 × 4 matrix keyboard   目 录 摘 要 4 ABSTRACT 5 第一章 绪论 8 第二章 系统设计要求与方案 9 2.1 设计内容与要求 9 2.1.1 课题概述 9 2.1.2 设计内容与要求 9 2.2 总体方案的选择 10 第三章 电路总体的设计分析 12 3.1 智能工具柜的特点 12 3.2 智能工具柜存放对象 12 3.3 电路总体设计思路分析 12 3.4 各模块设计 13 3.4.1 电源模块 13 3.4.2 检测模块 14 3.4.4 显示模块 15 第四章 电路设计