包钢烧结圆筒混合机设计【CAD图纸全套】【2014年最新毕业资料】.doc

摘 要 圆筒混合机是烧结厂主要设备之一。一次混合机主要作用是将物料混匀及湿润，二次混合机主要是对物料进行制粒，使物料满足成分均匀、水分适中、透气良好的要求。混合料的进料由皮带机和漏斗两种形式，将料送入圆筒混合机的进料端，通过筒体的旋转，物料在筒体内呈螺旋状运动，在运动的过程中使混合料形成“滚落”状，从而完成物料的混合、湿润、制粒、混匀，通过圆筒混合机排料端的溜槽排到皮带输送机上。 阐述了混和、制粒时物料的运动过程，对圆筒混合机内物料运动的几种状态进行分析。描述了影响圆筒混合机混匀、制粒的因素。分析了圆筒混合机筒体各部分的力学性能，提供了相应的受力的计算方法。然后阐述了圆筒混合机传动装置的受力分析和计算方法，主要是对轴的安全性能的校核，保证传动的可靠性。 关键词 圆筒混合机；传动；受力分析；校核 Abstract Drum blender is one of the most important equipments in modern iron and steel corporation. The primary role of the first mixer is mixing materials and humid. The Mixer of second major is used to proceed granulation. Uniform material to meet constituents, moderate water, good ventilation requirements. Mixture of feed material from the belt and a funnel in two forms, Will be expected into the cylinder-feed mixer Through the revolving cylinder Materials in the cylinder show a spiral movement movement in the process of mixture formation is tumble accusation .Thus completing the mixed materials、 humid、 granulation and blending, Through mixing drum nesting end of the chute into the conveyor belt. The mixing and rolling process of material is explored. Several characteristics of material motion in drum blender are carefully analysis. Influence factors on material mixing and balling is described. Analysis of the mixing drum cylinder parts of the mechanical properties. To provide the corresponding force method of calculation. Then the mixing of the Transmission stress analysis and calculation method are explored the main to the axis is checking at the safety performance, Ensure the reliability of transmission. Keywords Drum blender; transmission; stress analysis; check 目录 摘要…………………………………………...……………………I Abstract.............................................................................................II 第一章 绪论...................................................................................1 1.1 引言 ....................................................................................1 1.2 圆筒混合机的发展............