CQM6132主轴前轴承加工工艺及夹具设计【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 摘要 零件的加工工艺编制，在机械加工中占有非常重要的地位，零件工艺编制得合不合理，这直接关系到零件最终能否达到质量要求；夹具的设计也是不可缺少的一部分，它关系到能否提高其加工效率的问题。因此这两者在机械加工行业中是至关重要的环节。 本次设计的是CQM6132主轴前轴承的加工工艺以及夹具的设计，CQM6132车床主轴前轴承是滑动主轴，滑动轴承的承载能力大，回转精度高，润滑膜具有抗冲击作用 ABSTRCT Is the components craft establishment, holds the very important status in the machine-finishing, the components craft establishes reasonable, whether do this direct relation components achieve the quality requirement finally; Jigs design is also an essential part, whether does it relate raises its processing efficiency the question. Therefore this both in the machine-finishing profession are the important links. What design is the CQM6132 main axle front bearings processing craft as well as jigs design, the CQM6132 lathe main axle front bearing is the glide main axle, sliding bearings bearing capacity is big, the rotation precision is high, the fluid film has the anti-shock effect, then in processes bearings time has high processing technological requirement, therefore in establishment processing craft time, must consider bearings each precision as well as the shape and the location tolerance and so on. When design processing internal bore conical surface three circular arc fuel tanks unit clamp, to reduce processes each section of circular arcs the processing time interval, uses a turntable and bearings thread joint fastens the bearing, the basic plane which and the jig bodys bottom surface incline the jig body and the turntable contact 1.43° (was equal to that work piece by machined surface 1:20 taper), is achieved through its coordination radial bearings direction, when processes a fuel tank, then the processing next fuel tank, does not need to load and unload the work piece, like this reduced the bearing fuel tanks processing position error as well as raised the processing efficiency. Key word: Craft design, cutting specifications, Jigs design ,localization datum, position error. 目 录 中文摘要 Ⅰ 英文摘要 Ⅱ 前言 1 第1章 零件的分析 1 1.1