TX50A-N铣削动力头传动箱设计（手动变档）【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 摘 要 本论文主要阐述了组合机床的铣削头动力部件，TX系列铣削头是通用动力部件，它与铣削工作台或动力滑台配套辅以各种支撑部件可组成各种形式的组合铣床。铣削头以采用疏齿端面铣刀为基础，也可使用较小直径的密齿端面铣刀用来对钢、铸铁、有色金属等材质的零件进行平面铣削；安装辅助工具台后，也可完成铣槽、铣肩等工艺。This paper mainly expounds the combination machine tools and power components of the milling head, TX series the milling head is general power components, it and milling table or slip sets of form a complete set complementary with power support components can form various forms of combination milling machine. The milling head to the toothed end face of milling cutter as the foundation, also can use a smaller diameter end milling cutters dense tooth of steel, cast iron, for non-ferrous metal materials parts plane milling; Install auxiliary tools back, also can complete slotting, milling shoulder, etc. Craft. The design requirements and task is to design TX50A-N milling head power transmission box parts, the main motor power 7.5 KW, spindle speed 40 ~ 250 RPM 9 levels, spindle cone hole 50 #, transmission box gear transmission, hanging round of variable speed. To sum up, complete the whole design process needs a series of hard work. Designers first set up the correct design thought, trying hard to grasp the advanced science and technology and scientific dialectical way of thinking. At the same time, also insists the theory with practice, and in practice continuously review and accumulate design experience, to relevant areas of science and technology workers learning, the constant development and innovation, to better complete mechanical design task. Then, under the guidance of tutor, the milling head design scheme in analysis and choice. The selected solution, by consulting relevant transmission box design books and related illustrations, consult the relevant documents in the foreign language translation complete. Reference related material completed the overall design. Key words: The milling head power; Transmission box; Wheels; Variable speed;  目 录 摘 要 1 Abstract 2 目 录 1 引 言 2 1 绪