XB市220KV变电所一次部分设计【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 毕 业 设 计『论 文』 论文题目：XB220KV变电所一次部分设计 系 别： 专 业： 电气自动化技术 班 级： 学 号： 姓 名： 指导老师： 提交时间: 摘 要 随着我国经济的快速发展，电网的负荷也飞速增长,导致对中间变电站的需求越来越大，特别是处于中间环节的主变是220kv的变电站。本变电站设计以实际工程技术水平为基础，以虚拟的变电站资料为背景，进行含有3台主变的XB220KV中间变电所一次部分设计 本设计首先根据任务书上的要求，对电力系统和变电所进行总体分析，从负荷增长方面阐明了建站的必要性。接着，由电力系统的规划及供电范围确定了主变压器台数、容量及型号。然后通过变电所的概括以及对拟建进出线条数来考虑，从可靠性、经济性、灵活性方面考虑，确定了220kV、110kV、10kV侧主接线，同时也完成了所用电的设计和无功补偿的设计。然后，根据最大持续工作电流和短路电流计算的计算结果，对高压断路器、隔离开关、母线、绝缘子和穿墙套管、电压互感器、电流互感器进行了选型。然后又根据变电所地理位置和变配电要求以及电气总平面布置要求，进行配电装置设计与电气总平面布置设计。最后对变电所进行防雷设计，从而完成了XB220kV变电所一次部分设计。 关键词：电力系统 变电所 主接线 短路电流计算  Abstract With the fast development of our country’s economy, the electrical network load also rapidly grows, in the electrical network will have the 220kV transformer substation which 3 hosts will change gradually to increase. This transformer substation design take the actual project technical level as the foundation, take the hypothesized transformer substation material as the background, carries on includes XB220KV transformer substation partial designs which 3 hosts changes. Firstly according to in the project description the request, this design carries on the overall analysis to the electrical powersystem and the transformer substation, has expounded the station construction necessityfrom the load growth aspect. After that, has determined a main transformer number, the capacity and the model by the electrical powersystem plan and the power supply scope. Then through the transformer substation summary as well as to plans to construct the turnover linenumber to consider that, from the reliability, the efficiency, the flexible aspect considered, had determined the design which 220kV,110kV, the 10kV side host wiring, simultaneously also completed which has used electricity the design and the idle work compensates.