矿山绞车TP环面蜗杆减速器的设计论文【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 摘 要 本次毕业设计主要阐述的是矿山绞车TP环面蜗杆减速器的设计方法，该减速器是蜗轮蜗杆减速器的一种形式。 本设计课题来源于张家港某矿山工程机械有限公司，通过分析传统减速器的设计方法和主要考虑的问题，以矿山绞车减速器为设计背景，按照设计准则和设计理论设计了TP环面蜗轮蜗杆减速器并加以校核，接着对减速器的部件组成进行了尺寸计算和校核，该设计代表了环面蜗轮蜗杆设计的一般过程，对其他的蜗轮蜗杆的设计工作也有一定的价值。 目前，在矿山绞车减速器的设计、制造以及应用上，国内与国外先进水平相比仍有较大差距，国内在设计制造减速器过程中存在着很大程度上的缺点，本文通过确定其合理的提升方式及运转参数，改造现有提升设备，采用最新最新技术、最新工艺、使其不断体积小、质量轻，提升能力大，运行准确可靠和高度集中化自动化方向发展。 关键词矿山绞车PT环面蜗杆减速器；结构设计 Abstract This graduation design is the main design method of mine hoist TP toroidal worm reducer, the reducer is a form of worm gear reducer. This design derives from a mine in Zhangjiagang Construction Machinery Co., Ltd., through the analysis of the traditional design method of main reducer and consideration, in mine hoist reducer design background, in accordance with the design criteria and design theory to design TP toroidal worm reducer and be checked, then the components of the reducer to the size of the calculation and verification, the design represents the torus worm general design process, on the other worm design work also has a certain value. At present, in mine hoist reducer design, manufacture and application of domestic, compared with foreign advanced level there are still large gaps exist, home to a large extent the shortcomings in the design and manufacture of reducer process, but our country is further enhancing the basic theory of equipment, determine a reasonable upgrade mode and operation parameters, transformation the existing lifting equipment, using the latest technology, the latest technology, it has small volume, light weight, big lifting capacity, accurate and reliable operation and highly centralized automated direction. Key words: Mine hoist; PT toroidal worm; reducer; structure design 目 录 摘 要 III Abstract IV 录 V 1 绪论 1 1.1本课题的研究内容和意义 1 1.2国内外的发展概况 2 1.3本课题应达到的要求 3 2 选定设计方案 4 2.1 原动机的选择 4 2.2 传动装置的选择 4 3 电动机的选择及动力参数计算 7 3.1 初选电动机类型和结构型式 7 3.2 电动机的容量 8 3.2.1 确定减速器所需的功率 8 3.2.2 确定传动装置