表103接触电流或保护导体电流和电烧伤的极限值.pdfVIP

10.3 Touch current, protective conductor current and electric burn The touch current or protective conductor current that may occur during normal operation of the luminaire shall not exceed the values given in Table 10.3 when measured in accordance with Annex G: Table 10.3 – Limits of touch current or protective conductor current and electric burn Compliance is checked in accordance with Annex G. 10.3 接触电流，保护导体电流和电烧伤。 接触电流或保护导体电流在正常运行过程中可能发生的灯具应不超过给定值时,测量在表10.3 按照附件G: 表10.3 接触电流或保护导体电流和电烧伤的极限值 接触电流 最大极限（PEAK）