谢桥矿2.4mtpa设计【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 摘 要 本设计包括三部分：一般部分，专题部分和翻译部分。 一般部分是谢桥矿240万吨新井设计。全篇共分为十个部分：矿井概述及井田地质特征、井田境界和储量、矿井工作制度、设计生产能力及服务年限、井田开拓、准备方式－采区巷道布置、采煤方法、井下运输、矿井提升与运输、矿井通风与安全和矿井主要经济技术指标。 谢桥矿矿井位于安徽省颍上境内，交通极为方便。矿区范围：西起Ｆ5 断层，东至F22与F209断层；北起1煤层隐伏露头线和张集勘探区三线， 南止于13煤层-900m等高线的地面投影线。东西走向长约8.9km，南北倾斜宽4.3km,面积约38.2006km2。井田内可采储量为60367万吨。矿井正常涌水量510m3/h，属于高瓦斯矿井。煤尘有爆炸危险性，并且煤层有自燃发火倾向。 本设计中谢桥矿年生产能力为240万t/a，服务年限为79.5a。矿井工作制度为“三八”制。矿井的采煤方法为综采一次采全高开采。矿井为双水平采区开拓。第一水平标高为-700m，采用立井开拓，主立井主要用于提升煤炭，副立井主要用于提升人员、矸石、和材料等。 矿井采用一矿一面的高效作业方式。工作面长度为210m。运输大巷采用3t底卸式矿车运输煤炭，轨道大巷采用蓄电池电机车牵引1.5t固定箱式矿车运输矸石和材料等。 矿井通风方式为抽出通风方式，风井布置方式为两翼对角式。 专题部分主要介绍了煤矿粉尘的防治等。 翻译部分题目为：“Synthesizing The Mechanization Adopts To Put A Coal Mines Technique And Its Outlooks” 关键词： 谢桥矿；矿井设计；粉尘；防治 ABSTRACT This design includes three parts: General part, translation part with special subject part. General part is Xieqiao mine 1.2 millions tons of new well design. Whole divides into 10 parts totally: Pit is general to state and well field quality feature, well field extent reached and reserves , pit duty degree, design productivity and service time limit , well field developing and preparation way － pick district tunnel arrange , the well and method of coal mining next transportation, pit promotion and transportation , pit ventilation and safe and pit major economic technical index. Xieqiao mine pit to locate in Anhui province Yingshang boundary, traffic is facilitated very. The scope of mining area: From west Ｆ5 broken layers, east is to F22 with F209 fault; From north 1 coal seams Yin bend to appear line and 3 fair exploration district lines, till south in 13 coal seams - the ground projection line of the contour of 900 m. Thing moves towards long contract 8.9 km, south north incline wide 4.3 km, area contract 38.2006 km2. In well field, recoverable reserves are 603,670,000 tons. Pit gush normally water quantity 510 m3/h, belong to high gas pit. Coal dust has explosive dangerousness, and coal seam have spontaneous combustion get angry