不规则网格上的曲面设计方法.pdfVIP

ISSN 1000-9825, CODEN RUXUEW E-mail: jos@ Journal of Software, Vol.20, No.6, June 2009, pp .1673− 1684 http://www.j doi: 10.3724/SP.J.1001.2009.03393 Tel/Fax : +86-10 © by Institute of Software, the Chinese A cademy of Sciences . All rights reserved. ∗ 不规则网格上的曲面设计方法 1 1,2+ 1 何 军 , 张彩明 , 杨兴强 1( 山东大学 计算机科学与技术学院, 山东 济南 250101) 2 ( 山东经济学院 计算机科学与技术学院, 山东 济南 250014) Constructing Surface on Irregular Meshes 1 1,2+ 1 HE Jun , ZHANG Cai-Ming , YANG Xing-Qiang 1(School of Computer Science and Technology, Shandong University, Ji’nan 250101, China) 2 (School of Computer Science and Technology, Shandong Economic University, Ji’nan 250014, China) + Corresponding author: E-mail: czhang@ He J, Zhang CM, Yang XQ. Constructing surface on irregular meshes. Journal of Soft ware, 2009,20(6): 1673−1684. /1000-9825/3393.htm Abstract: A method is presented for constructing surfaces on irregular meshes. The basic idea is to extend the B-spline method to irregular meshes through the decomposition and classification of uniform bi-cubic B-spline basis function. Given a quad mesh of control points, a basis function is constructed for each control point. Then the surface is defined by the weighted combination of all the control points using their associated basis functions. This surface is a piecewise bi-cubic rational parametric polynomial surface. It is an extension to uniform B-spline surfaces in the sense that its definition is an analogy of the B-spline surface, and it produces a uniform bi-cubic B-sp