基于变分贝叶斯理论机械故障源.pdfVIP

基于变分贝叶斯理论的机械故障源 盲分离方法研究 1 1 1 2 李志农 范 涛 刘立州 卢纪富 (1.郑州大学机械工程学院 郑州 450001 ；2. 郑州大学土木工程学院 郑州 450001) 摘要：未知噪声环境下机械源信号盲分离方法由于忽略噪声影响往往得到很差的分离效果。针对此问题， 本文提出了一种基于变分贝叶斯独立分量分析的机械故障源分离方法，该方法与传统的机械源分离方法相 比，具有以下独特特点，即不需要将未知噪声看成一种独立源，也不需要进行消噪预处理，可直接对噪声 干扰的机械源信号进行有效分离。仿真研究表明，提出的方法优于传统的机械源分离方法，分离误差大幅 度降低。实验结果也验证了本文提出的方法的有效性。 关键词：盲源分离，故障诊断，变分贝叶斯，独立分量分析 中图分类号：TP227 TH17 TN911 Blind Separation of the Mechanical Fault Sources Based on Variational Bayesian theory 1 1 1 2 Li Zhinong , Fan Tao , Liu Lizhou , Lu Jifu (1.School of Mechanical Engineering, ZhengZhou University, ZhengZhou 450001, China 2.School of Civil Engineering, ZhengZhou University, ZhengZhou 450001, China) Abstract ：The traditional blind separation method of mechanical sources generally can not give a satisfactory separation performance under the unknown noise. Based on this deficiency, a new separation method of machine fault sources based on variational Bayesian independent component analysis (VbICA) is proposed. Compared with the traditional method, the proposed method has such unique characteristics, i.e. the unknown noise can not be regarded as an independent source. The denoising preprocessing is also neglected. The mechanical sources under the noisy environment can be directly separated. The simulation result shows that the proposed method is superior to the traditional method, the separation error is greatly reduced. The experiment results also verified the validity of the proposed method . Key works ：Blind source separation (BSS), Fault diagnosis, Variational Bayesian, Independent component analysis (ICA) 境下，若忽略噪声的影响，基于盲源分离 0.引言