TBA9介质参数.docVIP

TBA9介质参数清单 Product Characteristic Value Notes Supply pressure 50 - 150 kPa (0.5 - 1.5 bar) [7.2 - 21.7 psi] Max pressure fluctuation ?100 kPa (?1 bar) [?14.3 psi] Max calculated pressure drop 150 kPa (1.5 bar) [22 psi] Calculated between product inlet and product outlet. Inlet temperature 5 - 50? C (41 - 122?F) Filling temperature 5 - 50?C (41 - 122?F) Varies from inlet temperature by +1-2?C(2-4?F) Max particle size 600 ?m pH 2.5 - 8 Electrical power Characteristic Value Notes Supply voltage to machine 400/230 VAC, 3 phase +N + earth Other voltages available to order with transformer. Max voltage fluctuation -10%, +10% Frequency 50/60 Hz To be specified on order. Recommended main fuse 63 A Value for optimum selectivity at 400/230 VAC. Consumption during preheating 1 11,2 kW Consumption during preheating 2 (start) 35,8 kW Consumption during preheating 2 (temperature control) 23,8 kW Consumption during Tube sealing 32,0 kW Consumption during preheating 3 25,5 kW Consumption during spraying 30.6 kW Consumption during drying 19,1 kW Consumption during external cleaning 5 kW Consumption during production 26,5 kW Control circuits Voltage 24 VDC Compressed air Characteristic Value Notes Supply pressure 600 - 700 kPa (6 - 7 bar) [87 - 102 psi] Consumption 500 ?100 l/min. (14.0?3.5 cu.ft/min.) Max particle size 20 ?m Max particle content 25 mg/m3 Dew point 2?C (35.6?F) Oil content 0.01 mg/m3 Cooling water Characteristic Value Notes Supply pressure 300 - 450 kPa (3 - 4.5 bar) [43.5 - 65 psi] Max inlet temperature 20?C (68?F) Consumption 14 l/min. (2.1 imp.galls/min.) Approximately 5 l/min (1.1 imp.galls/min) of total consumption can be recirculated. pH 5 - 8 Steam Characteristic Value Notes Water quality Drinking water Boiler additives must be suitable for use with drinking water. Supply pressure 170 kPa (1.7 bar) [25 psi] Max pressure fluctuation ?30 kPa (?0.3 bar) [?4.5 psi] Inlet temperature