单相有源逆变器模型构建与仿真的研究.doc

陕西科技大学 毕业设计（论文） 题 目： 单相有源逆变器 模型构建与仿真研究 系 别： 电子信息与控制工程系 专业班级： 供配电105班 姓 名： 张小伟 学 号： 指导教师： 王芳云 职 称： 讲师 二〇一四年 五 月 十 日 摘要 在科学技术飞速发展的今天，科学技术发展必须的要依靠先进技术，才能更好的为人类服务。移动电话、笔记本电脑、平板电脑和小型高科技电子产品越来越多的被人们使用。各类新能源的出现，不断地推动了逆变技术的发展。国家现在也在大力发展这一门技术，国家以后更多需要这方面的人才，为国家做出自己应有的价值。展望未来，逆变技术会发展得越来越壮大。我们应该好好的学习和掌握这一门技术。 本文探讨了单相有源逆变器的设计，?先对逆变系统的结构进行了了解，通过比较分析几种结构常用的结构对逆变电源原理有了初步的认识。在方案的选择上我们采用了直流升压斩波电路作为升压环节，采用逆变环节采用了全桥逆变电路。我们在MATLAB中搭建仿真模型，模拟现实电路。最后，设计所做的调试和仿真的结果，验证了本文的逆变思路的可行性。而且电路结构紧凑，电路简单，控制方便，在某种程度上减低了成本而且可靠性也得到了提高。 关 键 词：直流升压 全桥逆变 Matlab仿真 Abstract In todays rapid development of science and technology, science and technology development must rely on advanced technology, in order to better serve humanity. tablet PCs and small high-tech electronic products more and more used by people. Meanwhile, The emergence of new types of energy, Constantly promote the development of inverter technology. Countries are now also vigorously develop this gate technology, after the country needs more expertise in this area, and make its due value to the country. Looking ahead, the inverter technology will develop more and more stronger. We should be good to learn and master this gate technology. This paper discusses the single-phase active inverter design, the structure of the first inverter system were understood by comparing the structural analysis of the structure of several common principles for power inverters have a preliminary understanding. In our selection scheme using DC boost chopper circuit as a boost links using link inverter with a full-bridge inverter circuit. We build simulation models in MATLAB, simulate real circuit. Finally, the design and simulation debugging results done to verify the feasibility of the inverter idea of this article. And the circuit structure is compact, circuit is simple, easy to control, in a way to reduce the c