毕业设计论文英文翻译-Development of a monitoring and control platform for PLC-based applications.docVIP
- 38
- 0
- 约2.7万字
- 约 34页
- 2017-08-31 发布于广东
- 举报
英 文 翻 译
年 级:2004级
学 号姓 名:魏超
专 业:机械设计制造及其自动化
指导老师:肖世德
2007年6月
英文翻译
一 英文
Development of a monitoring and control platform
for PLC-based applications
Abstract
This paper discusses the design and implementation of a platform to remotely monitor and control PLC-based processes over TCP/IP or by using the GSM network. The platform is built using industry-standard off-the-shelf PLCs. Integrated with each PLC are communication processors that can be used for connectivity to the network and to a GSM modem. The communication processor module (Ethernet module) used in this work,
您可能关注的文档
- 毕业论文液压电梯的液压系统设计.doc
- 毕业论文英语原文Modeling and the Specification Oriented Study of the Inertial Navigation System on Ships.docx
- 毕业论文重庆会展物流现状及对策分析.pdf
- 毕业设计矿井提升及运输设备选型设计1.doc
- 毕业设计指导书-TYJL-II型计算机联锁系统配线施工组织.doc
- 变电站接地网工程设计方法研究.doc
- 变速器上盖组合机床总体设计.doc
- 大棚温湿度控制系统设计.doc
- 大学生在线产品评价参与意向影响因素分析-基于对浙江万里学院大学生的问卷调查.doc
- 2025红外成像系统噪声等效温差校准规范.docx
原创力文档

文档评论(0)