链式D_STATCOM建模及其状态反馈精确线性化解耦控制.pdfVIP

第 30 卷 第 28 期 中 国 电 机 工 程 学 报 Vol.30 No.28 Oct.5, 2010 2010 年 10 月 5 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 107 0258-8013 (2010) 28-0107-07 TM 71 A 470 40 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 链式D-STATCOM 建模 及其状态反馈精确线性化解耦控制 查晓明，张茂松，孙建军 (武汉大学电气工程学院，湖北省 武汉市 430072) Modeling of Cascade D-STATCOM With Decoupled State Variable Feedback Linearization Control Zha Xiaoming, Zhang Maosong, Sun Jianjun (School of Electrical Engineering, Wuhan University, Wuhan 430072, Hubei Province, China) ABSTRACT: To regulate the reactive power into power grid, 关键词：配电网静止同步补偿器；动态无功补偿；微分几何； the distribution static synchronous compensator (D-STATCOM) 状态反馈 has been considered as one of the most valid methods due to its 0 引言 salient features. Cascade D-STATCOM, constructed by cascading several identical H-bridge (single-phase full bridge) 随着工业现代化的发展，各种冲击性无功负荷 inverters, is a strong-coupled and multiple variable nonlinear 的不断投入对配电网电能质量产生了非常严重的 system, which makes the model building and controller 危害，甚至引起电网局部崩溃。同时，常规的无功 designing difficult and limits the application of D-STATCOM 补偿装置如并联电容器由于调节性能较差，不具备 as a result. This paper built up the nonlinear mathematical 快速性、反复性、连续性的特点，对冲击性无功负 model of cascade D-STATCOM by equivalent circuit 荷显得无能为力。静止无功补偿器 (static var conversion. Then a state variable feedback and accurate linearization method was presented based on the differential compensator ，SVC)是目前应用较多的无功补偿装 geometry theory. As a resul