串补线路故障点位置模型识别方法.pdfVIP

第 25 卷 第 1 期 中 国 电 机 工 程 学 报 Vol.25 No.1 Jan. 2005 2005 年 1 月 Proceedings of the CSEE ©2005 Chin.Soc.for Elec.Eng. 0258-8013 (2005) 01-0066-07 TM76 A 470 40 文章编号： 中图分类号： 文献标识码： 学科分类号： ⋅ 串补线路故障点位置的模型识别方法 索南加乐，陈福锋，齐 军，王向兵 （西安交通大学, 陕西省 西安市 710049 ） NEW METHOD FOR IDENTIFYING THE FAULT LOCATION ON SERIES COMPENSATED LINES BASED ON DIFFERENT FAULT MODELS SUONAN Jia-le, CHEN Fu-feng, QI Jun, WANG Xiang-bing (Xi’an Jiaotong University, Xi’an 710049, Shaanxi Province, China) ABSTRACT: Based on comparing inductance value calculated 1 引言 with different models and same data, a new method for 串联电容补偿是提高输电系统经济性和可靠 identifying the fault location relative to series capacitor on 性的有效手段[1~5] 。其主要作用在于:通过控制潮流 transmission lines with series compensated capacitor in the 提高电力系统的输送能力；改善电力系统的稳定 middle is proposed. Cooperated with the new method, traditional distance protection will avoid overreach for external 性；改善电压质量及无功功率平衡；减少系统的线 faults on compensated lines, the sensitivity of Zone 1 will be 路损耗，提高线路传输容量。它还具有提高系统暂 greatly improved. Since only the data before MOV operation 态稳定性、优化输电线路潮流和降低系统损耗的作 are used, MOV’s nonlinear characteristic needn’t to be 用。 considered in this method. Communication channels can be 串联补偿电容设计和应用中考虑到串补装置 saved for only one end data is used in this method. From the 的过电压保护，普遍采用了具有非线性伏−安特性 digital simulation results, we can see this method can be used 的MOV （Metal Oxide Varistors ）。MOV 的非线性 in all kinds of syste