硬质合金C4形刀片模具设计.docVIP

 攀枝花学院本科毕业设计（论文） 硬质合金C4形刀片模具设计 学生姓名： __ 学生学号： 院（系）： 年级专业： ____ 指导教师： ___ 助理指导教师：  摘要 根据使用粉末冶金工艺生产C4形。通过压坯形状设计对零件图的形状和尺寸分析，对其零件图进行部分尺寸的改。通过压坯正确、合理地选择工艺参数(如材料成分、松装密度、压回弹率及烧收缩率等)。利用这些参数进行如计算模具、压坯及烧结的径向和轴向尺寸。然后将这些工艺尺寸结合的基础知识粉末压制和烧结理论确定了设计压制模具的型腔，简要介绍了模具主要零件的结构特点如阴及模冲等并绘制这些主要零件。简单介绍如何选择模具材料及其应该满足的技术要求。对本设计的结果进行了讨论与分析，得出结论模具设计合理产品质量可靠，生产效率高，其成本比机加工低，效果好。 ABSTRACT According to the needs to use powder metallurgy process production C4 form the blade. Through to the pressure, the design of billet shape of drawing the blade of C4 shape and dimension analysis, Through its parts drawing part of the size of the changes. Through to the pressure billet is correct and reasonable density to choose process parameters(Like the material composition, loose the apparent density, compression, suppress rebound rate and burn a shrinkage rate, etc). The use of these parameters such as calculating the die casting, pressure and sintering in radial and axial dimensions, the upper die down, the lower die rushed the positioning of the height, Yin mode of the height of the design. Then will the process with C4 type size the basic knowledge of the blade and powder suppresses and sintering theory determined suppression of mold cavity design, And briefly introduces the main parts of the mould structure and the characteristic such as Yin mold and die blunt, etc. And the main parts drawing, Simple introduction how to choose material and should meet the technical requirements. This is the result of design was discussed and analyzed, draw the conclusion: The mould design is reasonable, material utilization rate, low energy consumption, the product quality is reliable, high production efficiency, its costs than mechanical processing low, the effect is good, suitable for mass production. Key words powder metallurgy ，C4-shaped blade ，Process design ，Mold design ，Parameter calcula