热轧带钢变行程和变步长结合窜辊策略研究.pdfVIP

J. Cent. South Univ. (2012) 19: 1226−1233 DOI: 10.1007/s11771-012-1133-z Roll shifting strategy with varying stroke and step in hot strip mill 1,2 3 1,2 4 LI Wei-gang(李维刚) , LIU Xiang-hua(刘相华) , GUO Zhao-hui(郭朝晖) , HUANG Jian-ping(黄建平) 1. College of Information Science and Engineering, Northeastern University, Shenyang 110819, China; 2. Automation Division, Baosteel Research Institute, Baoshan Iron Steel Co., Ltd., Shanghai 201900, China; 3. Research Institute of Science and Technology, Northeastern University, Shenyang 110819, China; 4. Hot Strip Mill Plant, Baoshan Iron Steel Co., Ltd., Shanghai 201900, China © Central South University Press and Springer-Verlag Berlin Heidelberg 2012 Abstract: A new roll shifting strategy with varying stroke and varying step was investigated. Two characteristic parameters including cat ear height and gap contour smoothness were introduced to assess the effect of shifting strategy on roll wear, and the relation between characteristic parameters and shifting strategy was established. Both varying stroke and varying step can reduce cat ear height and gap contour smoothness, so the shifting strategy with varying stroke and varying step is better than the one with either varying stroke or varying step. Based on the effect of shifting control parameters on characteristic parameters of roll wear, the selection principle of these shifting control parameters was gained. A case study was conducted to validate the proposed roll shifting strategy, reducing uncontrollable quartic loading gap contour, improving strip profile and extending rolling length o