空心项链管拉制机改进设计.pdfVIP

空心项链管拉制机的改进设计 摘要 空心项链管拉制机的改进设计 摘 要 在贵金属首饰项链制作工艺当中，为了达到减少首饰的重量又要使项链显得粗大的目的，往 往把项链做成空心的。目前,空心项链所使用的空心管,都是使用人工拉制，工艺非常落后，工人 劳动强度大，拉制的空心管质量不稳定，成品率低，品种规格少。为此必须要求有专门拉制空心 管的专用拉管机。 鉴于目前公司内部及国内外同行业的生产情况，已普遍使用实心拉丝机来拉制实心丝材用于 生产制造实心项链。因此可以借鉴实心拉丝机并探索改进设计，改造成空心拉管机，用于拉制空 心项链管的专用拉管机。 本文以意大利SISMA 公司生产的TRA10P 型实心黄金拉丝机为借鉴参考对象，对其进行改进 设计，尤其是改进了电器自动控制系统部分，以达到减轻工人劳动强度、提高产品质量的目的。 关键词：空心项链管拉制机，改进设计，拉拔力，电器自动控制系统 I 空心项链管拉制机的改进设计 摘要 ABSTRACT Production process in which precious metal jewelry necklace, jewelry in order to reduce weight but also the purpose of the necklace looked thick, often necklace made of hollow. Currently, the use of tube necklace, are drawn by worker’ hand work. The technology is very backward, workers worked hard, drawn hollow tubes unstable quality, low yield, less varieties and specifications. So we must require a special machine for drawning hollow tube. Given the current internal and domestic industrys production, has been widely used to drawn solid wire drawing machine for manufacturing solid wire necklace. Therefore, solid wire drawing machine can draw on to improve design and to explore and transform into a hollow tube drawing machine for drawing hollow tube necklace dedicated trombone machine. In this papers, produced TRA10P Italian SISMA solid gold wire drawing machine for the type reference of the object, its improved design, in particular, improved electrical control system parts, in order to achieve reduce labor intensity and improve product quality. KEY WORDS : necklace tube pullers, to improve the design, drawing force, electrical automatic control system