数控英文版说明.docVIP

On the CNC Turning Process Analysis Abstract: CNC machining technology and general machine tools increases process though a lot of similarities, but there are also many differences. To this end, analysis of CNC turning processes.  Keywords: CNC lathe Turning Technology Technology Analysis TurningAbstract: CNC machining technology and general machine tools increases process though a lot of similarities, but there are also many differences. To this end, analysis of CNC Lathe Processing. 一. The contents of the CNC Turning Process CNC Turning process is used when the CNC lathe parts used methods and techniques combined. Its main contents include the following aspects: (1) Select and identify parts of the CNC Turning content; (2) the part drawings CNC Turning Process Analysis; (3) tool, fixture selection and adjustment of design; (4) processes, working step design; (5 ) processing trajectory calculation and optimization; (6) the preparation of CNC turning processing, verification and modification; (7) the first piece of test processing and on-site treatment of the issue; (8) the preparation of CNC machining technology of technical documents; In short, CNC machining process the content more, some similarities with ordinary machining. 二. CNC Turning Process Analysis Process analysis is the early stage of CNC turning process preparations. Process of making a very reasonable or not, the programs establishment, machine processing efficiency and processing precision parts have a significant impact. In order to prepare a reasonable and practical processing procedure that requires the programmer, not only to understand the working principle of CNC lathe, performance characteristics and structure. Master programming languages and programming formats, but also proficiency in workpiece machining process, determine a reasonable cutting parameters, and correctly use tools and workpiece clamping methods. Therefore, the process should follow the general principles of combi