毕业设计_机械零加工的工艺分析和加工程序的编制（定稿）.doc

随着现代机械业的发展，旋转接头已普遍应用于各个行业邻域，本产品主要用于冶金业是专为钢铁行业连铸机设计，产品的作用是将流体介质输送管道与旋转，往复运动或摆（转）动某角度的设备相连接，既保证连续不断向运转的设备、管道传递流体，又要防止流体介质相互串通、泄漏和外界杂物进入工作介质。旋转接头是机器上的非功能部件，但是其作用，对整台机器的设备，甚至整个工厂的影响都很大。特别是随着我国各行业的迅速发展，旋转接头将得到越来越广泛的应用。为了杜绝流体的跑冒滴漏防止对环境的污染，节约能源和物料，改进设备运转状况和操作条件，减轻工人的劳动强度。Abstract With the development of modern machinery, rotary joint industry has generally been applied to various neighborhood. This product is mainly used for the metallurgical industry for the steel industry continuous casting machine design, product is the role of fluid medium pipes and rotating, reciprocating or place (to) move a certain point of view of the equipment connected, both to ensure continuous operation Equipment, pipeline transmission fluid, and also to prevent collusion between fluid medium, leakage and debris into the work of outside media. Rotary Joint machine is on the non-feature, but its role, the whole machine equipment and even entire factories have great impact. Especially as Chinas rapid development of various sectors, the rotary joint will be more widely used. In order to prevent fluid run, run, drip, leak and prevent the pollution of the environment, energy conservation and materials, improve equipment operating conditions and operating conditions and reduce labor intensity of workers. Keyword: Machinery, rotary joints, metallurgical industry, steel industry 目 录 第一章　绪论 1 第二章 零件的工艺分析及程序编制 2 2.11 零件图的工艺分析 3 2.12 零件的装夹方案 3 2.13 刀具的选择 3 2.14 切削用量的选择 4 2.15 零件的加工顺序和进给路线 4 2.16 数控加工工艺卡片的拟订 5 2.17 程序的编制 5 2.2 过度套的加工 14 2.21 零件图的工艺分析 14 2.22 零件的装夹方案 15 2.23 刀具的选择 15 2.24 切削用量的选择 15 2.25 零件的加工顺序和进给路线 16 2.26 数控加工工艺卡片的拟订 16 2.27 程序的编制 17 2.3 空心轴的加工 23 2.31 零件图的工艺分析 23 2.32 零件的装夹方案 24 2.33 刀具的选择 24 2.34 切削用量的选择 24 2.35 零件的加工顺序和进给路线 24 2.36 数控加工工艺卡片的拟订 25 2.37 程序的编制 25 2.4 静环座的加工 31 2.41 零件图的工艺分析 31 2.42 零件的装夹方案 32 2.43 刀具的选择 32 2.44 切削用量的选择 32 2.45 零件的加工顺序和进给路线 32 2.46 数控加工工艺卡片的拟订 33 2.47 程序的编制 33 结束语 38 致 谢 39 参 考 文 献 40 第一章　绪论 本产品（旋转接头）主要用于冶金工业，此产品专为钢