8层电梯plc设计.doc

基于PIC的控制系统设计——高层电梯 Ⅰ摘 要 随着现代城市的发展，高层建筑日益增多，电梯成为人们日常生活必不可少的代步工具。电梯性能的好坏对人们生活的影响越来越显著，因此必须努力提高电梯系统的性能，保证电梯的运行既高效节能又安全可靠。传统的电梯控制系统采用的是继电器逻辑控制电路，这种控制易出故障，维护不便，运行寿命短，占地空间大，正逐步被淘汰。 为了提高自动控制系统的可靠性和设备的工作效率，设计了一套以PLC为核心控制器的电梯自动控制系统，用来取代以往的较复杂的继电器—接触器控制。系统的核心部分（控制部分）使用了日本三菱公司生产的FX2N-128MR-001型PLC，因为在核心控制部分采用的是软件程序控制，从而在保证电梯正常运行这个要求的情况下，大大的提高了电梯故障检查与维修的方便性和容易性，同时还克服了手动操作所带来的一些人为干扰因素，取得了良好的预期效果。 关键字：PLC，电梯控制，梯形图 ⅡAbstract With the development of modern cities, an increasing number of high-rise building, elevator become an indispensable means of transport of daily life. The quality of the lift performance of the impact on peoples lives becoming more and more obvious, it must strive to improve the performance of elevator systems, and ensure the operation of the lift is safe, reliable and energy efficient. The traditional elevator control system uses logic of the relay to control circuit, this kind of controls easily to be crash, maintains inconveniently, the movement life is short, and that occupying a large area of space, it being eliminated gradually. For raising the credibility of the automatic control system and the work efficiency of the equipments, design a set of take PLC as the core controller of the elevator auto control system, using to replace former more complicated of after electric appliances-the contact machine control. The core part(control part) of the system used a Japanese Mitsubishi company to produce of the FX2N – 128MR-001 type PLC is the software procedure control in the core because of what to control the part adoption, thus Be promising the elevator circulates normally under the circumstance of[with] this request, raised elevator to break down check and the convenience and easy for maintain consumedly, still overcame to move an operation some artificial interference factors bring in the meantime, obtain the good results. Keywords：PLC, elevator controlling system design, ladder diagra 目 录 Ⅰ摘 要 2 ⅡAbstract 3 1 绪论 6 1.1设计的研究背景及意义 6 1.2电梯的国内外发展状