柴油发电机.xlsVIP

EDG Power distribution 在引擎运行期间,引擎也会产生一些需要排放的燃料(DO).在运行期间,通常会 DG-5101-TK5 Square attaining higher level of DO drain tank, DO transfer pump starts to discharge the transferred and storred in drum cans for disposal or other uses. 将这些累积起来的DO泵送到DO 中转罐里.万一DO的质量不可合格的话(外来物质 等的含量过高),它就会转移存储到一小罐里以进一步处理或作其它用途之用. Details of DO drain transfer pump: DG-5101-P5 Screw DO drain transfer pump is auto start / stop type - controlled by DO drain `LL` and `HH` - alarm generation shall be there. 泵开启以从罐里排放废油,在液位达到L时它会自动停止.当液位达到LL和HH时, 会在那里产生警报. Cooling Water section EDG consists of various cooling water streams for cooling different combustion inside the engine cylinders and hence cooling is necessary and to be extracted continuously also for good health of generator insulation. All these cooling effects are achieved using Cooling Water network available with the engine. Various CW users are classified based on their normal working temperature. CW network consists of vapor venting as well as fresh water make up tanks. During operation, some water gets evaporated and also there has been some losses due to leakage from the system (like-gland leakage from water circulation pumps etc) - hence some make up also necessary. EDG有很多冷却水,以冷却引擎不同的部件以及与引擎相关的流体.当汽缸内 燃烧时,会产生大量的热量,因此用夹套对每一个汽缸冷却是很有必要的.在运行期 间LO的温度也会上升,因此也要持续地冷却降温.引擎T/C系统会生产温度很高的 压缩空气,因此也需要冷却.发电机在工作期间也会产生一定量的热量,因此为了 发电机良好的绝缘性能,也需要将这部分热量取出.所有的这些冷却都是由引擎 自己的冷却水管网完成的.根据不同的工作温度,我们可以将不同的CW用户分类. CW管网系统包括蒸汽的排放,也包括新鲜水的补充罐.在运行期间一些水会蒸发 掉,同样,也还有一些水因系统的泄露(水循环泵的密封垫片的泄露,等)而损失掉, 因此适时的补充一些水也是必要的 . HTCW (High temperature cooling water) Normal working / operating temperature of this CW is comparatively higher HTCW is used for the following purposes: HTCW的工作/操作温度相对与其它类型的CW要更高一些,它被用来冷却高 温的引擎部件或者是一些高温的流体.在EDG系统里,这种HTCW主要用于以下目 的: (a) Cooling of compressed charge air in stage-1. (b) Cooling of engine cylinders. (a) 冷却压缩空气的第一阶段. (b) 冷却引擎的汽缸. engine itself and hence water flow rate and working pressure takes time to HTCW在从引擎获得热量后,就需要在散热器里持续地冷却.HTCW泵是由引