载体成型条件对低温脱硝Mn-CeTiO2_催化剂的影响.pdf

2012 31 7 CHEMICAL INDUSTRY AND ENGINEERING PROGRESS 1517 Mn-Ce/TiO 2 1 1,2 1 1 1 2 266555 300191 TiO , 2 TiO X XRD BET SEM 2 : 105 800 4 h TiO2 TiO 2 Mn-Ce/TiO2 X 511 A 100066132012 Influences of carrier forming conditions on SCR denitration Mn-Ce/TiO2 catalysts at low temperature 1 12 1 1 GENG Chunxiang LIU Wenrong ZHANG Binghua CHAI Qianqian 1 2 School of Chemical EngineeringChina University of PetroleumQingdao 266555ShandongChina Tianjin United Environmental Protection Engineering Design Co.Ltd.Tianjin 300191China Abstract Phosphoric acid solution was used as the raw material to make TiO . The effects of adhesive 2 proportioncalcination timecalcination temperature in the preparation process were investigated. The characteristics of the carrier were determined by using X-ray diffraction (XRD)surface detection system (BET) and scanning electron microscopy (SEM). The results showed that the carrier of the catalyst was in the form of anatase under the following conditions drying temperature at 105 calcination temperature at 800 calcination time of 4 h. Key words low temperature denitration forming carrieradhesiveMn-Ce/TiO2