新型热压WC-Fe基金刚石钻头钻进试验.pdfVIP

第42 卷 第6 期 煤田地质与勘探 Vol. 42 No.6 2014 年 12 月 COAL GEOLOGY EXPLORATION Dec. 2014 文章编号: 1001-1986(2014)06-0117-04 新型热压WC-Fe 基金刚石钻头钻进试验 金 鑫 ( 中煤科工集团西安研究院有限公司，陕西 西安 710077) : 为满足硬岩钻探的需要，将传统的热压碳化钨(WC)基金刚石钻头胎体中一部分 WC 用 Fe 代替，用 Excel 中的回归分析和非线性规划求解计算出的最优胎体配方，试制了新型热压WC-Fe 基金刚石钻头，在可钻性为 8 级以上的岩石上进行了室内、外钻进试验，取得了较好的效果。 ：WC-Fe 基胎体；金刚石钻头；硬岩；钻进试验 ：TG74 ；TQ164 ：A DOI: 10.3969/j.issn.1001-1986.2014.06.025 Drilling test of new type of hot pressed tungsten carbide and iron-based diamond bit JIN Xin (Xi ′an Research Institute, China Coal Technology and Engineering Group Crop, Xi ′an 710077, China) Abstract: A part of WC in the matrix of the traditional hot pressed tungsten carbide based diamond bit is replaced by Fe. The new type of hot pressed tungsten carbide and iron-based diamond bits were designed by using optimal matrix formulas calculated by regression analyses and nonlinear programming of EXCEL and then manufactured to perform drilling test in rock with drillability of 8. The tests yielded good effect. Key words: WC-Fe-based matrix; diamond bit; hard rock; drilling test (2 3 ) WC (1 ) 3 1 2 [1-3] 表1 WC-Fe 基胎体配方 Table 1 The formulae of tungsten carbide and iron-based matrix % WC 663-Cu Ni Co Mn Fe 1 40 35 10 10 5 - 2 12 26 2 5