基于ANSYS的瓦楞纸板抗压强度分析与研究.docVIP

学 号：  HEBEI UNITED UNIVERSITY 毕业论文 GRADUATE THESIS 论文题目：基于ANSYS的瓦楞纸板抗压强度分析与研究ANASYS分析文件和结果， QQ229780692 2012年06月01日 摘 要 瓦楞纸是瓦楞芯纸经过起楞加工后形成有规律且永久性波纹的纸；瓦楞纸板是由一层或多层瓦楞纸粘合在若干层纸或纸板之间的一种复合纸板。本文利用有限元分析法主要对瓦楞纸板的边压强度进行研究与分析。瓦楞纸板从结构上分有很多形式，本文把三层瓦楞纸板作为研究对象。首先，用物理实验方法测出三层瓦楞纸板的边压强度，并记录实验数据。然后，在有限元分析软件ANSYS中建立三层瓦楞纸板的有限元模型，由于瓦楞纸板在板平面内承受压力是一种稳定性问题，所以采用屈曲分析，通过特征值屈曲分析得到理想状况下瓦楞纸板的屈曲载荷。将其与实验结果进行对比，如果结果差异不大，可以证明ANSYS软件的准确性与可行性。如果有较大差异，需要通过多次分析验证判断出导致结果有差异的原因，并采取相应措施缩小其与实验结果的差距。 关键词 瓦楞纸板；边压强度；几何建模；分析 Corrugated paper is the paper that the core paper after pressed waves forming regular waves; Corrugated cardboard is a kind of composite board that have a layer or many layers of corrugated board bonded at cardboard. In this paper, i used the finite element method mainly to research the edge compressive strength of corrugated board. Corrugated board structure has many forms, this paper put the three layer corrugated cardboard as the object of study. Firstly, in physical method to detect corrugated cardboard edge compressive strength and record the data . Then, establish the model of three layer corrugated board in the finite element analysis software-ANSYS. It is a stability problem that corrugated fiberboard is pressed in the plate plane, so buckling analysis is used. It is used to research buckling load in the ideal and actual conditions. Contrast the results with the experiment, if they are similar, then it proves that the software-ANSYS is exact and feasible，if not, through repeated analysis determine the reasons for the differences of result and take appropriate measures to narrow the gap with the experimental data. Keywords corrugated board; edge compressive strength; geometric modeling; buckling analysis 目 录 摘 要 I Abstract II 第1章 绪论 1 1.1 瓦楞纸板概述 1 1.2 国内外瓦楞纸板研究现状 3 1.2.1 国内瓦楞纸板研究现状 3 1.2.2 国外瓦楞纸板研究现状 3 1.3.瓦楞纸板研究的意义 4 1.4本文研究的主要内容 4 5 2.1稳定性理论 5 2.2 薄板的屈曲及基本方程 7 2.3 有限元分析理论及应用 9 2.4 物理实验测定瓦楞纸板边压强度 10 ANSYS软件在包装领域的应用 12 3.1 ANSYS软件的功能模块 12 3.2 ANSYS 软件在包装工程中的应用 13