凹版套色印刷系统的模型控制的研究.pdfVIP

th Proceedings of the 26 Chinese Control Conference July 26-31, 2007, Zhangjiajie, Hunan, China 凹版套色印刷系统的模型控制研究 邓忠华，李 曦，叶小萌 华中科技大学 图像信息处理与智能控制教育部重点实验室,武汉 430074 E-mail:hust_cct@163.com 摘 要：针对传统人工套色控制系统速度低、套色误差大等缺点，结合国外凹版印刷机配备的自动套色系统的特点， 采集了大量实验数据，经过系统辨识得出系统是一个纯滞后系统，设计了一种基于 smith 预估控制的模糊 PID 控制 器的自动纠偏系统。数值实验表明，采用这种自动纠正系统提高了套印的精度和印刷速度，简化了操作，提高了印 刷质量。 关键词： 自动套色，辨识，Smith 预估器，模糊 PID 控制 Model and Control for Gravure Register Printing System Deng Zhong hua, Li Xi, Ye Xiaomeng The Key Laboratory of Image Processing and Intelligent Control, Huazhong University of Science and Technology,Wuhan430074,P.R.China E-mail:hust_cct@163.com Abstract: According to low speed and register error big of the traditional artificial register control system based on characteristics of overseas register control system, a great deal of experiment data is sampled and used to identify the register system model, which is analyzed and recognized as a dead time system And an adjustment algorithm is designed for automatic color register control system based on smith-fuzzy PID. The numerical experiment demonstrates the scheme adopted can raise the accuracy and printing speed of the system, simplify the operation, and raise the printing quality. Key Words: Automatic Register, Identification, Smith Predictor, Fuzzy-PID Control 应数量的印刷环节来完成图案的印刷；也就是将各 1 引言(Introduction) 个颜色分别来印刷，各个色组之间的相对位置是一 套色控制系统要达到预期的控制要求，控制算 定的，所以套色控制系统的关键就是怎样保证这个 法是关键，所以为了对系统实施高效、准确