2015届本科毕业设计论文.doc

2003届本科毕业设计论文 题目 串口通信与控制系统 院 系: 信息工程学院 专 业: 计算机科学与技术 指导教师: 王正山 学生姓名: 沈庚森 班 级: 计科9902 2003年6月 毕 业 设 计 书 。 接受任务学生： 班级：计科9902 姓名：沈庚森 开始及完成日期： 自2003年3月至2003年6月 设计（论文）指导： 指导老师：王正山 摘要 在实验室和工业应用中，串口是常用的计算机与外部串行设备之间的数据传输通道，由于串行通信方便易行，所以应用广泛。 本次设计的目标在于：在VC++6.0的环境下，编写使用C++语言,SQL数据库的串口通信程序设计适合本程序的串口通信协议。定时接受来自串口的数据帧，按照通信协议发送数据，并有一定的数据帧查错能力。本次毕业设计，就使用VC++对串口进行编程，自己设计串口通信协议，进行了一些尝试，虽然能够基本完成设计要求，但是还有很多地方需要改进。 ： 串行通信、VC++6.0、Win API、MFC32位程序 In laboratory with industry apply, common is widely used as the passage of correspondence between computer and equipment because serial communication is an easy way of usage. This project is aimed at designing a serial communication program under VC++6.0 environment, using C++ language and SQL database, to control the flour mill under control of SCM. It is planned to concurrently monitor 12 machines via serial expansion, because the destination is only an attempt at serial communication programming, this program is aimed at solo SCM. First, operator can configure serial parameters. Second, operator can monitor the status while the data is transferred from the flour mill to computer via serial port, and can rejigger the parameters. So that it is necessary to design a serial communication protocol suitable for this program. Receiving data frame sent from serial port occasionally, as data from SCM can be divided into 3 species, sorted by AX, BX, CX in data frame. ending and receiving data according to communication protocol, and has the checkout function as well. Furthermore, for security reasons, guarantee is needed. This program is entitled basic function for secrecy. Operators can enter the password and rejigger it. The function for secrecy is relatively simple, can be further improved, using more complex arithmetic to actualize more strict secrecy. In all,this graduate designs, I tried using VC++ to programme serial communication